View Full Version : performance ignition leads!
lee19871
3rd September 2007, 20:42
changed my spark plugs today i got some ngk iridium tipped ones, started the car up and run beautifully, but i thought while i got some decent plugs better uprate my leads so i bort a set of k1 igntion leads, they are the correct ones, connected them in the correct order and made sure they were on tight started car up and it was running lumpy as fook! what the hells going on, there suposed to make the car run better not worse?
KamRacing
3rd September 2007, 20:52
have you connected them correctly...
if so
swap back to the originals and see if that cures the problem..
lee19871
3rd September 2007, 20:54
yeah thing is i put the originals back on and the car runs fine? im sure im connecting them in the right order as i just followed the locations of the originals. not sure wether the leads are faulty or im doing something wrong?
KamRacing
3rd September 2007, 21:03
Unless they aren't seating correctly they must be faulty... I''d stick with the o/e items
Ben_L
3rd September 2007, 23:12
Sounds weird mate, although I had a problem with my leads. Not quite high performance but hey were bosch and one of mine were faulty and caused the car to missfire etc. The fact the might be faulty could be a possibility especially if you were able to connect the others again and the car ran fine on them?
vBulletin® v3.8.2, Copyright ©2000-2025, Jelsoft Enterprises Ltd.