Changing clutch on furio/vtr

[Tobs]

rite lads got to change my clutch on my car tomorrow never done a tu engine before so just wondering what i should look out for and what tips there are that will help a deal?

many thanks guys rep for good advice

[mallboy]

its a pretty easy job really. just mainly got to remove the battery tray and airbox/filter. just get another person to help you grab the box out as it may need a bit of shaking to get out. one thing to be careful of is to make sure it doesnt leak as it is very common with tu boxes. maybe look at the correct torque settings as too tight could warp it and cause a leak

[SAM33R]

same as above plus you gotta take driveshafts out and lower ball joints will have to be removed at spme point. it only takes a few hours, you'll lose oil out the box, top that up afterwards.

you have to remove the exhaust downpipe bolt which is on the gear box, and gearbox mounts obviously...

[Tobs]

all fun a

just drove back from the mrs and could just get up a small hill cause it was slipping so much :(:P hahah