Log in

View Full Version : no power to amp .....


andy212g
19th October 2007, 21:08
:P Hi , I have just put my new install in tonight all the wires are in the right place but the amp won't come on :panic: :n: ( i have gon over the wires again and agian ) i have fited installs many times b4 but this as got me stumpted .....

Any ideas ??:y:

Predator_R32
19th October 2007, 22:51
have another look at the earth wire mate

check the fuses, if it all seems in order, check to see your getting power from the remote and power with a multimeter

Mark51
20th October 2007, 00:13
make sure you have a good earth (most people use the one under the rear seats and sand the paint off)
check the remote wire (make sure you use speaker wire, make sure its connected to the correct wire on the headunit)
check the fuses
check the connection to the battery

Wilkys-sexy-saxo
20th October 2007, 00:18
or change it on the head unit from remote on to power antea or the other way round, thats the problem i had.

x

andy212g
20th October 2007, 00:26
Thanks , i will check again :P

andy212g
20th October 2007, 14:15
Problem fixed , it was a crapy remote lead :P
Thanks for the advice :y: