Air intake

[smiith]

Anyone know if there is anywhere that sels things to replace my foglights, but fit in the origonal holes perfectly, so i can run cold air feed hoses up from them?

if anyone knows where i can get hold of some, il tickle your belly for you

[OLLYVTS]

I wouldnt put a air intake in your fog light hole as it is just to lower to the ground and your air filter could suck up water through it.

[DJsaxo]

You will probily need to make one you self with firbeglass or some thing else similar .


I have never scene any thing for sale to fit the fog light hole .

[Quick]

http://cgi.ebay.co.uk/SAXO-FURIO-VTR-VTS-WESTCOAST-PASSENGER-SIDE-FOG-LIGHT_W0QQitemZ260177168008QQihZ016QQcategoryZ1037 6QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Remove glass, cut hole in rear, add ducting!

[DJsaxo]

http://cgi.ebay.co.uk/SAXO-FURIO-VTR-VTS-WESTCOAST-PASSENGER-SIDE-FOG-LIGHT_W0QQitemZ260177168008QQihZ016QQcategoryZ1037 6QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Remove glass, cut hole in rear, add ducting!

Good idea there .

Never thought of that , if done right would look great and should work great too .

[OLLYVTS]

Can nobody see my 1st post?

[jeeves_101]

yeah they can, but unless you drive through a MASSIVE puddle you would more than likely be fine.

[DJsaxo]

Can nobody see my 1st post?

Yer but if you drive carefully and don't drive in the big puddles your ok .

[smiith]

i know what you mean with water olly, but i cant see water gettin up the pipes to the engine or to the airfilter, as it would have to travel upwards quite abit

[craig180]

I've had cold air feeds running from the fog light holes before and never had a problem with water.

I would just cut an existing foggy out as already suggested

[David]

My air intake is lower than the fog's, it's under the front splitter. I don't have problems with water.