Power steering pipe rubbing when lowered info...

[kiddy_vts]

heard things about this but dont actually know what to do. can anyone explain or even better put up a diagram of what rubs or what to do to provent it? any help appreciated coz i dont have a clue where to start!!! cheers

[samcook]

look at the back of the engine bay to the left of the inlet manifold and you will see the steering arm have alook along that and you should be able to see where the power steering pipe rubs, all you need to do is bend the pipe out of the way

[kiddy_vts]

look at the back of the engine bay to the left of the inlet manifold and you will see the steering arm have alook along that and you should be able to see where the power steering pipe rubs, all you need to do is bend the pipe out of the way
ok cheers. i thought it was there

[Matthew1684]

This happened to mine!

The pipe was bent out the way but eventually it worked its way back (i must not have tied it back correctly as it still rubbed through in in tern my powersteering went)

If you want to do it properly, www.abpmotorsport.co.uk do a modified arm which is basicaly a standard arm, just bent in the place it rubs against the pipe so it will never happen again!

Its about £60 deliverd! worth doing imo!

[Scott]

lol bend it right and its free..

see the premium how to section i put a guide in there

[Matthew1684]

lol yea or just save ya self £60 and ignore me totally!! lol.... i was just being lazy!