torsion bar prob

[louis_23]

if your torsion bar seezed pritty bad most places wont tuch it what can i do now cuz realy need to drop my car. any surgestions? thanx guys

[Crunkers]

Pretty much a whole can of WD40 and a hammer

[raunchz]

.... and a blow torch - try heating up the arms where the torsion bar sits in - but obvi not the torsion bar itself!!

It will come out eventually, just be persistant and you will be rewarded, once you stand back and see your car sitting much better !!

[medz_vtrturbo]

.... and a blow torch - try heating up the arms where the torsion bar sits in - but obvi not the torsion bar itself!!

It will come out eventually, just be persistant and you will be rewarded, once you stand back and see your car sitting much better !!

stay away from the blowtorch

[John]

stay away from the blowtorch

Yep whats about all the brake lines and bearings that are about.

[Predator_R32]

have a search, definately been covered a few times, stevenet15 did some good diagrams (animated)

speak english not text talk :y:

[louis_23]

thanx lads

[Sean]

You might find it easier to drop the axle off the car to give you more room to work with. It's actually a lot easier than it sounds and may end up savin gyou time in the long run.

[williamsvts]

or pay me £50 and i'll do it.