View Full Version : Front Anti Roll Bars All The Same?
Steve
14th January 2008, 20:37
When fitting standard exhaust noticed it was bent to fuck right up into the car :n:
How much is a new one? or just get a second hand one?
Steve
14th January 2008, 20:43
just been on ebay get one for a tenner delivered. they all the same size 22mm??
jpsaxo
14th January 2008, 21:15
http://cgi.ebay.co.uk/Citroen-Saxo-VTR-VTS-Complete-Front-ARB-Anti-Roll-Bar_W0QQitemZ230211833244QQihZ013QQcategoryZ10376Q QssPageNameZWDVWQQrdZ1QQcmdZViewItem
try ebay mate
EDIT: Just seen your last post, just trying to help out Lol
Steve
14th January 2008, 21:28
lmao are they all 22mm? on the passenger side is it meant to bend earlier?
richies vtr one doesnt even bends both sides. just thinking cos doesnt look like too a beating.
but ones on ebay look the same as mine. the bends should be even all the way across yeah?
that ebay one does bend earlier like.
willsy
14th January 2008, 23:44
Should have the bends in the same places, ie, its symmetrical
:)
Steve
15th January 2008, 08:52
Should have the bends in the same places, ie, its symmetrical
:)
mine is shagged then, they all 22mm? one on ebay i can get.
Steve
15th January 2008, 09:02
the one am going to get is off an s1 rallye but was reading there not all the same?
blusax
15th January 2008, 18:01
mmm i m not too sure mate but i think they are different on some models. i.e the vtr/vts has drop link bars where as the other versions dont.
i'll have a look later on in my haynes manual to see if its noted (bit busy at mo)
Steve
15th January 2008, 18:04
106 rr say they are different for teh drop links :( al get that tiff on here to get me one :)
Matty-VTR
15th January 2008, 19:09
woahhhh wait a minute..post a pic of your anti-roll bar. It's supposed to have bends in it
AXracing
15th January 2008, 19:12
There are many different front ARB’s that were fitted to the Saxo, AX and 106 (all basically the same car)
Ethro
15th January 2008, 19:24
whats the thickest then and where can it be found :D
Steve
15th January 2008, 19:29
woahhhh wait a minute..post a pic of your anti-roll bar. It's supposed to have bends in it
yeah got bends but i thought they were symetrical the bend which is in teh middle of the car is just missing the bottom of the car! and its not a smooth bend looks like its been bashed.
AXracing
15th January 2008, 19:29
22mm is biggest you can get standard that uses the drop link mounting system. These are found on a lot of the more sporty 1.6 Saxo and 106s. You don’t really fined any larger ones. A lot of the suspension stuff comes from racing and a lot of race cars run smaller or no front ARBs. So hence there are not really any bigger ones floating around.
vBulletin® v3.8.2, Copyright ©2000-2025, Jelsoft Enterprises Ltd.