VTS alarm button!!!!!!!!!!!!!!!

[b0t13]

ok my alarm is going off all the bloody time atm,

when i hold the button in the red led lights up and when i hold it in again it goes away!, which one disables the inside sensors so my alarm doesnt keep going off.

thanks!!

[DAN-VTS]

ignition on, ignition off, take key out etc, press and hold the ultrasonics button until the light comes on, remove finger from button, get out and lock car. job done

[Joesnow]

You have to do that each time you lock the car though which is a pain in the arse... Take out the 2 black wires from the alarm control box and it will be fixed for good! - Guide (http://www.asbomotorsport.co.uk/files/saxoultrasound.pdf)

[b0t13]

rep left, cheers..

[Matthew1684]

Wow brilliant! Didnt know this was possible...

[DevilDamo]

Mine used to go off all the time and having to disable it every time I got out of the car was becoming annoying. In the end, I had the interior sensors ripped out.

However, it's also best to check that the catch under the bonnet hasn't snapped off. The reason I say this is that the small plastic catch is linked to the alarm and if that has snapped, then the alarm will sound thinking somebody is trying to break in through via bonnet.

[Oo_ben_oO]

yea it is possible it just dissables the sensors for e.g to keep an animal in the car but still alarmed