hole in front doors pred ?

[bakkipouch]

right i've mounted all my components up etc.. to door card just wondering where abouts u all have drilled the hole in your door to get the wire to the amp or is there another way ?

just asking quick as i ont wanna go through a runner window or anything that will get damaged :y:

thanks bakkipouch

[bakkipouch]

bump no one ? rep for any 1 thats post

[thythus]

Sorry mate, would love to help but know nothing about installing components into doors :(

[David]

Can't you run them under the carpet mate...?

[bakkipouch]

Can't you run them under the carpet mate...?

on about to the from the door to the car / car to the door

if u follow i often dont explain things proper

[steve_335]

I just used the original wires, you should be able to follow them to the headunit, you can then wire up amp from there.

[tjrburns]

i did the same as steve, but if you want to use better speaker cable, thread it throught the rubber tubey bit by the door hinges. will be a tricky job tho!

[SamHlm]

I drilled new holes into the doors just below the main connector thing that holds the original wires and then taped the new speaker cables up to protect them

Check that the door will close proeprly as well and that the speaker cables wont get trapped

You could also just cut into the exisiting cables that run through into the doors and connect the components this way

[Predator_R32]

ive got pictures somewere mate, pm me and ill have a look later for you :y:

[bakkipouch]

teanks guys pred u've been pm'ed :D

[VTR_Dan_VTS]

Yeah, i used the original wires as they are not too bad and cut them back from the headunit and took them uner the carpet to the amp. ;)

[bakkipouch]

what colours are they on the back of the headunit ?

[OLLYVTS]

I drilled new holes near the bottom of my doors.Just make sure you know that there is nothing you are going to hit inside the door.If you have a look under the carpet near the bottom of your dash there is a holes with a rubber gommet,i made a hole in the gommet and ran the wires through that and drilled the hole in my door at the same height.