A cupple of wireing questions!!

[Keefo]

Ok, at the moment i have my sub wired up to my amp as shown in my awsome paint drawing....

http://www.dt-jg.com/best,diagram,ever.......JPG

So, what ohm of this????

I want to wire it at 1ohm to get more RMS to the sub but not sure if i have wired it rite??

Both the sub and the amp have 2x + and 2x -, but i beleave that the Sub's 2x + and - are bridged inside anyway....

Also, as i have 2 amps, i want to know if there is a decent power/ground/remote distributor i can buy, to make wireing them up all that bit easier!!

[saxmaster]

im pretty sure thats wired at 4ohm to ire it at 2ohm you need to bridge the connections but for 1ohm ive no idea try talk audio or wait for a better reply maybe

http://i71.photobucket.com/albums/i138/8valver/02-08-07_1653.jpg

so my sub is running 2ohm but if i took the bridge out it would be 4ohm

[Mark51]

whats sub and amp have you got?

[Keefo]

Your all going to bitch but me dont care!! i like them!!

There from TheLoudest.com, got there 3000w Sub and Amp.

U can see the amp conections here

http://www.theloudest.co.uk/pages/jsview.php?image=images/products/large//bbf8d0935bf8c3371f98182ec16fe3b5.jpg

and sub connections here

http://www.theloudest.co.uk/pages/jsview.php?image=images/products/large//16a83ec5ddeaf57e6b0cf2c4375b7544.jpg

On the sub there is another pair on the other side, i have there enclosure too with the connections on the side which can also b linked together as they are on this image.

http://www.theloudest.co.uk/pages/jsview.php?image=images/products/large//image_95_3_large.gif

[saxmaster]

can these actually be run at 1ohm? dosent give detail

[Keefo]

not sure!! haha thats y i asked!! im not sure how to wire a sub to 1ohm.

Says on the amp manual that it could do tho.

1 x 3,000 watts Max (@ 1 ohm)
1 x 1,000 watts RMS (@ 1 ohm)

http://www.dt-jg.com/amp.JPG

But as you can see it shows that the sub has 2x + and -, but only shows one + and - coming from the amp!!

So which + and - do i use on the amp???????

[saxmaster]

you only need 1 connection from the amp

[Keefo]

but does it matter which?? like the middle + and -, or the end + and -??

also, anyone know anything about a power, ground and remote distributor block to help wire up 2 amps??

I can only find power ones that will go from 1 power to multiple others which is good, but that would mean id need to buy 2 for power and ground, is there not one that can do all 3??

so 1 input for each of ground, power, remote, and an output for 2 of each?