quick shift

[BROCKYS_VTR]

having problems fitting my quick shift cant seem to free the ball joint from the linkeges arm any ideas ??

[grantley1988]

try using a screwdriver with a thick blade and one with a long handle with good leveridge

[BROCKYS_VTR]

what way you think easyer through the engine bay or underneath the car ??

[Mark51]

if its a griffiths one then yes you will need to jack the car up. use a 19mm spammer to prise the linkages apart.

what quickshift is it?

http://www.saxperience.com/forum/showthread.php?t=106672&highlight=quickshift

[BROCKYS_VTR]

i belive its a griffiths one i got it off ebay i just had ago at it through the engine bay bt what a fu*king night mare i dont want to force the ball joint to much

[Mark51]

if its a griffiths one then yes you will need to jack the car up. use a 19mm spammer to prise the linkages apart.

what quickshift is it?

http://www.saxperience.com/forum/showthread.php?t=106672&highlight=quickshift

have a look at the guide posted in the above post mate

[BROCKYS_VTR]

alright cheers mate i suppose il have to try again on the weekend

[Mark51]

its a 20 mins job mate. the first one i did it took me 30 mins as i was trying to fit it to the wrong linkage, lol

its the linkage thats nearest driver side of the car

[Predator_R32]

20 mins more like 5 if you know what your doing :p

to get the linkage off i just used some wd40 and muscle, got half way down the car and just grinned and bared the pain and it came off lol

[furio-james]

if in doubt hammer it out :) worked with my seized up rear wiper today luckly didnt smash the window :y:

[grantley1988]

i did mine from the top of the car. took 15mins :)