View Full Version : Best Brake setup that can fit under VTR wheels......
adamsax
24th March 2008, 20:01
As above really...
I wanna know everything about the best fluid, the best MC, what caliper/disc size I can get away with, any griding required......everything really.
Cheers:y:
Baz
24th March 2008, 20:02
406 MC (23mm i think)
with the 206 GTi Brakes, no grinding or anything, just fit with a few mm to spare
IMO
adamsax
24th March 2008, 20:04
Will I have issues with the fact my VTR has ABS as standard?
I'm told this is rare as fcuk.
Baz
24th March 2008, 20:05
shouldn't think so, the 406 MC come both with ABS and without ABS. Pretty sure it would be fine?
Mark51
24th March 2008, 20:07
as long as you get the ABS MC off the 406.
the disc size would be 266mm from the GTI but you can also get the 266mm setup from a 306 S16, 306 xsi, berlingo (not 100% sure though), 206 hdi (again not 100% sure)
adamsax
24th March 2008, 20:07
Cheers fella.
LEE_VTR1
24th March 2008, 20:14
just made a thread about this and then noticed you thread and your basicly asking the same questions
might aswell get my thread deleted lol
LEE_VTR1
24th March 2008, 20:36
bump anyone?:bump:
Foggy
25th March 2008, 01:00
Here you go...... Click Me..... (http://www.saxperience.com/forum/showthread.php?t=69303&page=4) Post 63 onwards.
They will fit under a std VTR rim :P
Zephyr
25th March 2008, 01:38
...you can use your ABS without problems, here in Italy itīs tested on 266 and also on 283...you donīt have to take the other car Abs...I cannot explain you in English why but I will try it anyway...the Abs of another car isnīt stronger of yours, itīs setted that when he recognize that the wheels are stopping it comes to work, it doesnīt matter wich brake calipers you have! Because if it wasnīt like this if you put a better discs and pad on your standard caliper it would activate itself before the wheels really stops!
And I doubt that a 406 Abs would fit perfectly on your car...
I hope you understood me!
cheers
Mark51
25th March 2008, 07:18
^^iirc correctly the 406 MC is slightly bigger but will still fit. if you ABS then imo it would be better to keep it. one of the main reasons why people fit the bigger MC is for better pedal response (ie, firmer feel).
LEE_VTR1
25th March 2008, 12:35
Here you go...... Click Me..... (http://www.saxperience.com/forum/showthread.php?t=69303&page=4) Post 63 onwards.
They will fit under a std VTR rim :P
aha cheers foggy but i dont really want to pay 1200 for them lol
AlexB
27th March 2008, 09:56
the abs on a saxo works off the hub so the disc ect is not affected by it
i had to reaseach this for the wilwoods on my vts as i was unsure
but it basically means you can use a non abs set up no problems
MaRiO89
27th March 2008, 10:16
Knew you would mention yours Foggy..:D
The 266mm 206 GTI brakes will fit and are good..:D
vBulletin® v3.8.2, Copyright ©2000-2025, Jelsoft Enterprises Ltd.