satansoft
25th March 2008, 17:32
Hi all, hope you can help. My daughter has just bought a new Head Unit for her Saxo, which is standard ISO wiring. Problem is, the previous owner has cut the Power and Speaker cables inside the dashboard, and has bodged a pioneer stereo onto the cut ends, so the connector in the dash is no longer ISO, but an old pioneer connector.
I am just going to remove the old bodged connector, and solder in new ISO connectors.
I have sourced this at Maplin:
http://www.maplin.co.uk/Module.aspx?ModuleNo=99497&&source=14&doy=25m3
Does anyone know which wiring colours in the dash are Left, Right, Front and Rear speakers. Ideally the power connector colours would come in handy too.
Thanks for any help. . .
I am just going to remove the old bodged connector, and solder in new ISO connectors.
I have sourced this at Maplin:
http://www.maplin.co.uk/Module.aspx?ModuleNo=99497&&source=14&doy=25m3
Does anyone know which wiring colours in the dash are Left, Right, Front and Rear speakers. Ideally the power connector colours would come in handy too.
Thanks for any help. . .