ALLOY WHEEL PROBLEM

[scook]

Ive bought some new alloy wheels for my VTS and was about to put them on but realised that each have the alloys on at the moment currently have a special bolt (locking nut) on them. I have not got anything to be able to remove these bolts. whats the easiest way to get these bolts of.

[saxx]

if its a lockin nut u'll need the tool which goes with them?

[SaxoAL]

Or you will have to drill them off.
Get a stud removal kit from somewhere like Halfords.
Or go to Kwikfit or somewhere like that and they usually remove them for about £5 a wheel.

[scook]

Cheers for the help guys , will get that done later today.

[chrisni1986]

failin that m8 get a socket a size smaller than ur studs n a hammer lol dats wot i hadda do

[scook]

OK Managed to get them out , But know the rest of my other bolts are too short (because of the spacers) and so i have got to buy a new set of 12 bolts and locking nuts , these wheels are becoming a real pain in the ass

[Deanlppl]

aslong as the bolts have atleast 6 turns, you are okay to use them.

[Dan]

citroen should have had a locking nut for the wheels as mine where with the car.

[scook]

Got me new wheel on now , thanks for the help guys