clay bar

[kxhaz]

hello what is the best clay bar to get??? :y:

cheres

[Branter33]

Totally depends on what you're using it for. :y:

If your just using it on normal paint then Yellow Superfine Polyclay or the Meguiars Quick Clay kit will do the job.

But for more stuborn marks, and wheels I would go for the Sonus Grey. But this is a pretty aggresive clay and can marr the paint.

:y:

[kxhaz]

first one sounds good its not that bad tbh

[Branter33]

Yeh the 1st one will be fine then... I use the yellow Superfine Polyclay most of the time. You get 2 decent size bars. Last a good while. Especially if your just going to be using it on your own car :y:

[kxhaz]

ok mate thanks uv got rep :y:

also were can u buy this onlin just lookd on ebay and cant find any

[Predator_R32]

i rate sonus highly or you may want to try this stuff

http://cgi.ebay.co.uk/Bilt-Hamber-Auto-Clay-SOFT_W0QQitemZ180252231144QQcmdZViewItem?_trksid=p 3286.m20.l1116

only clay about that just needs water as a lubricant :y:

[kxhaz]

i rate sonus highly or you may want to try this stuff

http://cgi.ebay.co.uk/Bilt-Hamber-Auto-Clay-SOFT_W0QQitemZ180252231144QQcmdZViewItem?_trksid=p 3286.m20.l1116

only clay about that just needs water as a lubricant :y:

that sounds good as u dont have to keep buying lubricant :y:

[Predator_R32]

ill be doing mine shortly with it ill let you know how it performs :y:

[kxhaz]

also when u use it and it gets dirty is that it throw it away or what?? how many times can u use it?

[Predator_R32]

well id say 2 times use it mate, but with the bilt hamber one cut it into about 5 pieces, you only really need to clay the car 2 -3 times a year tbh

[kxhaz]

ok mate thanks repd :y:

EDIT: need to spread the love :(

thanks any way tho

[Branter33]

Pretty much once you can't mould a clean surface on the clay... Then throw it out. As if you're using a bit thats dirty, you may scratch your paint.

But as Pred said, just cut the block up into like 4-5 segments.

Also, I use just plain water when using the Superfine Polyclay and never have any problems. Just make sure you keep it well lubricated :y:

[kxhaz]

Pretty much once you can't mould a clean surface on the clay... Then throw it out. As if you're using a bit thats dirty, you may scratch your paint.

But as Pred said, just cut the block up into like 4-5 segments.

Also, I use just plain water when using the Superfine Polyclay and never have any problems. Just make sure you keep it well lubricated :y:

ok mate thanks alot :y:

[Krys_23]

Sonus Green Bilt Hamber or Megs mild blue bar does it for me :y: