single wiper all for 20quid:D

[saxo412]

got a single wiper off a citroen ax yesterday n looked at n thought no way is this going to fit!

took it all apart n fitted it to my saxo moter n it works:D


get pics up tomoz when finishing off the car:P


need a new wiper arm tho a straight one!

[frankie]

get a guide up boss.

[Lee_Boy]

did this bolt straight in then with no messing about ?

[saxo412]

youve got to mess about with the rods on the ax moter a little bit and then attatch them to the saxo moter! took me about 45mins as i didnt know what i was doing but i got there in the end so for someone that knows about things like this id say its a 10 min job max

[saxo412]

i ll get some pictures up this afternoon of how the rods are positiond on the moter and try explain how its done :D

[Lee_Boy]

yea mate if you wouldnt mind please :)

[saxo412]

http://i278.photobucket.com/albums/kk112/saxo412/P220708_144801.jpg

looks crap like this but when i get a new wiper arm thats straight will look well good


http://i278.photobucket.com/albums/kk112/saxo412/straightwiper.jpg

[Andy]

i love the look of the single wiper, remember on mine it was quite easy to fit but that was a proper kit

http://i4.photobucket.com/albums/y103/andycorsa/SP_A0023-1.jpg

[chris205]

Ive got a single wiper on mine, did you just change over the wiper linkages etc to make it single?

[saxo412]

STEP 1 - lift the bonnet , undo the wiper nutts remove wiper arms persuading them off if necessary









STEP 2 - undo the to nutts one at either side and remove the plastic scuttle








STEP 3 - undo the 3 retaining nutts and remove the wiper moter cover






STEP 4 - unscrew the wiper moters multi-plug





STEP 5 - unscrew the three remaining bolts and lift out the hole unit


http://i278.photobucket.com/albums/kk112/saxo412/P220708_1546.jpg





STEP 6 - undo the moter to linkage nutt



http://i278.photobucket.com/albums/kk112/saxo412/P220708_154601.jpg




STEP 7 - remove the linkage arms from the moter
http://i278.photobucket.com/albums/kk112/saxo412/P220708_1548.jpg


you wont be needing these after!


STEP 8 - take the ax moter linkage arms off the moter

(sorry dont have a picture)




STEP 9 - now fit the ax linkage arms to the saxo moter! this part is quite tricky so take your time! the longest arm on the linkage from the ax needs to be turned around for a straight fit otherwise the mechanisam will rub!
also remember that the linkage arms need to sit downwards not sitting upwards as they will hit the top of the scuttle pannel!


STEP 10 - tighten up all nutts and put everything back together on the scuttle ,


once this is done you can refit the wiper arm, you dont need a new one but a straight strom wiper arm looks alot better than a saxo wiper arm! or one from a c15 van






hope this helps guys:D

[saxo412]

yeh just changed the linkages fitted the AX ones to the saxo moter fildled about with it n it works just need a new wiper arm and position it better to make it look good

[Proffitt]

Great guide that Nath :y: considering doing it to mine :)

[Proffitt]

Tripple postage ftl :n:

[Proffitt]

Little green blob coming your way :D

[Saxy1]

looks good mate, you got it well cheap too. :y:

[Lee_Boy]

looks kool gonna doit myself this weekend :)

[saxo412]

wooop:D cheers tom! took me a while to do lol but got it done ! need to find a straight wiper from somewere now becausr the strom wiper arms are 30quid ! not paying that lol!

[Green-VTS]

C15 van, ring citroen for a price :)

[richt247]

ive never been a fan of these like !