need a quick answer ppl!!!!

[WestyVTR]

a VTR lowerd 80mm would the arches need cuttin & playing wiv on 195-45-15 wheels....?????

HELP ASAP!! smileys/smiley14.gif

[saxx]

i would say yes

[Scott]

not at the rear, might find it catching on full lock on the front, how are you going down 80mm? kiss bye to your shockers and any sort of handling

[WestyVTR]

i want it down 60mm really but if thats not low enough i will drop it lower... 80mm is the next option shocks will get done... thinkin of buying the spings first both 60 & 80mm....

[Dan]

will look lovely but will handle like shit like scott said.

[Ratty]

you will need shorter dampers and only bilstein do them and thats a max of 60mm, if you go any lower you need coilovers. But i assume this is for looks and you dont use the car much as anything lower than 40 creates problems with bushes and driveshafts, and on the rear you wont have any travel on the dampers so will be the worst ride ever specially on these roads, and it wont pass an MOT.

[WestyVTR]

mots arnt a problem... say no more! will 60mm see the tyre in the arch!? if so then that is low enough.... smileys/smiley14.gif

[WestyVTR]

http://www.potn.com/-_c1473_1474_1513_1518_p1254037.htm

wot do you think ppl good deal or not!? smileys/smiley5.gif

[DevilDamo]

will 60mm see the tyre in the arch!? if so then that is low enough.... smileys/smiley14.gif

yes!

[WestyVTR]

Damo r u sure!?! wot do you think of the kit above!?smileys/smiley9.gif

i can c u know wot "VTS" stands for! and VTR!!!? smileys/smiley2.gif

[AARON1100]

have you thought about air-bags?.

[WestyVTR]

Airbags!!? How do you mean!? smileys/smiley5.gif smileys/smiley9.gif

[Dan]

kinda like hydraulics i think?

[robbovts]

hi, got a phadse 1 vts lowered 60mm front and about 70mm at the rear, sitting on standard vts rims. Havent had any trouble with rubbing just had to replace a suspension arm.