DIY Stuff

[Mike-VTR]

*******NOOB ALERT*******

right utter noob, just wondering how hard is it and how do i go about taking the saxo and citroen badges off the back?????

and how would i spray the citroen badge on the front black? mask the surrounding area, rub,prime,spray then laquer?

also... the light tinting spray. can i use this on my stock rear lights and would it look similar to the smoked jellews taillights if anyone knows what i mean.

cheers

[Mike-VTR]

or would it be better/easier just to buy them

http://cgi.ebay.co.uk/CITROEN-SAXO-SMOKED-JEWEL-DESIGN-REAR-LIGHTS-1-PAIR_W0QQitemZ360081382339QQcmdZViewItem?hash=item 360081382339&_trkparms=72%3A1301%7C39%3A1%7C66%3A2%7C65%3A12%7C 240%3A1318&_trksid=p3286.c0.m14

[Quick]

Mk1 or mk2?

Rear badges come off easily, but there are mounting holes for each.

[Mike-VTR]

mk2

i know they come off easy i just wondered how hard it is to fill in the holes???

and make them look smooth

[bluenotesmiley]

The rear badges pop off but [I think it leaves glue] it needs the holes filled and then repainted, or welded from the rear. That can be an expensive job to get done professionally.

The front grill [on a Phase 2] has about 7 torx screws on the rear which allows the grill to be unclipped. The Chevrons then also unclip the the bottom leg of each of the two individual parts of the Chevron.

[Mike-VTR]

cheers mate

[LSOfreak]

by spraying the lights , it wont make them look like the smoked jewels, it will be a matte black colour depending on how much you put on, i think to make them shiny and black (which looks alot better) people spray a bit of laquer on them