Jordy's Clean Topaz

[Jordy6969]

Hi all,

Just thought id put a few pics up of my VTR, just picked it up last week..
Sorry its dirty but it was p*ssing it down earlier, so went for some pics with rey when it stopped earlier on!

Got a 4-2-1 and 40mm lowering springs waiting to go on!

Enjoy


http://i152.photobucket.com/albums/s183/reymatt/Saxo/DSC01072.jpg

http://i152.photobucket.com/albums/s183/reymatt/Saxo/DSC01071.jpg

http://i152.photobucket.com/albums/s183/reymatt/Saxo/DSC01070.jpg

http://i152.photobucket.com/albums/s183/reymatt/Saxo/DSC01066.jpg

http://i152.photobucket.com/albums/s183/reymatt/Saxo/DSC01065.jpg

http://i152.photobucket.com/albums/s183/reymatt/Saxo/DSC01064.jpg

http://i152.photobucket.com/albums/s183/reymatt/Saxo/DSC01063.jpg

http://i152.photobucket.com/albums/s183/reymatt/Saxo/DSC01062.jpg

http://i152.photobucket.com/albums/s183/reymatt/Saxo/DSC01061.jpg

http://i152.photobucket.com/albums/s183/reymatt/Saxo/DSC01056.jpg

T-Cut the badges today, put a 206 aerial on and the red grill!

[rey]

looking good Jord ;)

[xxxvickxxx]

nice sax :y:

[_ELECTABUZZ_]

yeah man looks like your gonna have a killer! mint.

[Jordy6969]

Yer I blacked out the back badges yesterday and i didnt realised how much effort it took to do it.

me and rey were doing it for at least around 40 mins ;)

my arm = nakkered

[Recovery]

clean it! lol nice saxo lad

[Andy_89_VTR]

Thats gonna look mint mate when its done

[Jordy6969]

Yer i put a 1.1 grill on it for the moment because this weekend i am going to spray the citroen chevrons black and meshing my old one

not sure i should put the standard black one back on or keep this temporary grill on?

[rey]

keep the red!

[Jordy6969]

i got my vtr on a couple of weeks ago and i am over the moon with it
the main thing i need to sort immediatly is the brakes......they are really screechy and feel like they slip when i apply them firmly!!!
do i neeed new calipers or just the pads?
People have told me either the 206 Gti or Berlingo brakes are a good option, with my price range at no more than £120

[Speller_18]

Nice vtr m8, I bet that green vtr belongs to a gay boy!!. Gota get them lowering springs on. I maybe see you this weekend and get some pics of all three of us

[rey]

jordy get the berlingo brakes, same as GTi's just cheaper!

and Chris, get fucked! :p

[Jordy6969]

Nice vtr m8, I bet that green vtr belongs to a gay boy!!. Gota get them lowering springs on. I maybe see you this weekend and get some pics of all three of us

haha nice one mate and the pictures sound like a good idea

i got some more pictures today when it was sitting on my drive, simply because i thought that it deserved some attention
http://i458.photobucket.com/albums/qq304/ingram690_123/DSC03900.jpg
http://i458.photobucket.com/albums/qq304/ingram690_123/DSC03901.jpg
http://i458.photobucket.com/albums/qq304/ingram690_123/DSC03903.jpg
http://i458.photobucket.com/albums/qq304/ingram690_123/DSC03905.jpg
http://i458.photobucket.com/albums/qq304/ingram690_123/DSC03906.jpg

Its not all that clean again but it seems like a waste of time with the weather we've been having recently

Plans
De-pin the doors
Rear de-wiper
Lower by 45mm all round
Smoke front headlights and fogs
Spray citreon chevrons amphracite
Mesh grille (mabye as alot of saxo's nowadays have that done)
Fit raceland 4-2-1 mani
266mm front brakes

anything else that anybody feels would look good on the car?

[rey]

looks good jord!

its anthracite and you forgot to mention putting on the 266mm brakes...

[Steve_90]

have u thought about smoking your front lights? would go with the wheels.

[rey]

Plans
Smoke front headlights and fogs


he has indeed ;)

[Peasnall]

looking good, will look smart with smoked fogs and headlights

[baker556]

jd looks good man ! i cant beleive i still havent seen this in person yet !........anways its looking good matey we should all go for a picture shoot sometime !

[Jordy6969]

Crashed my VTR last night, totally gutted and can't believe it because it came out of nowhere

the road was so greasy and icy which didnt help my cause

and then..... while we was waiting for the good olde RAC a moped went through and fell on its side on the same corner

It is a write off and I will be breaking for parts soonish

pics will be up soon!

[rey]

gutted :n:

[wobble_vtr]

wtf?!! was goin so well!! sorry to hear it mate

[rey]

http://i152.photobucket.com/albums/s183/reymatt/jords%20sax/DSC03922.jpg

http://i152.photobucket.com/albums/s183/reymatt/jords%20sax/DSC03921.jpg

http://i152.photobucket.com/albums/s183/reymatt/jords%20sax/DSC03920.jpg

http://i152.photobucket.com/albums/s183/reymatt/jords%20sax/DSC03919.jpg

http://i152.photobucket.com/albums/s183/reymatt/jords%20sax/DSC03918.jpg

as far as i know the car is being broken, thread will be up later in the week..

[Ben]

Looks bad mate, sorry to hear about it. Hope your alright

[LVC_VTR]

saxo looked good mate shame about the crash :(

[baker556]

wtf JD i didnt even get a ride in it yet?! hope your ok tho mate from what i heard your abit peeed off about it ! will come see you somtime man.....

[maxo]

look ssmart in red i did look at one befor i found the black one red one already got sold cars looks sound tho

[rey]

look ssmart in red i did look at one befor i found the black one red one already got sold cars looks sound tho

have you actually looked at the latest update lol...

[Jordy6969]

ok well i got this a couple of weeks ago now but havent had the chance to post it up along with some pictures

it has 70k on it and is the 1999 model but has slight problem at the moment which is a knocking noise around the front passenger side of the car whenever i turn at slow speeds but i suspect for this to be a worn top mount because i have already changed the ball joint,

it has no grille at the moment but it will be going on early this week along with a standard gold petrol cap that btw i cant get anywhere if anyones got one going ;)

i plan to refurb the R wheels along with get them sprayed anthracite or something like that anyway, along with either tinting the lights myself or purchasing a set

also can people tell me how they sprayed there citroen chevrons, do they come off the grille?

cheers, enjoy
http://i458.photobucket.com/albums/qq304/ingram690_123/newcar2.jpg

http://i458.photobucket.com/albums/qq304/ingram690_123/newcar.jpg

[My4tt91]

new one looks nice bud. shame about the crash in ur old one looked pretty bad.

[t-brown]

nice mate love the colour!
if you take the grill off u can take the chevrons of u just have to un-clip them from the back

[Jordy6969]

nice mate love the colour!
if you take the grill off u can take the chevrons of u just have to un-clip them from the back
cheers for that mate, i will remember that before i clip put the grille back in!

ohhh btw the previous owner didnt know how much it was lowered by, any ideas? i rekon about 80mm

[Jordy6969]

let me know what you all think! i will get some more pictures up tomorrow

the car is getting booked into the garage for the change of the top mount on monday so depends how much space they have, i have the part so they are charging me £65 for the labour.... anyone changed a top mount before and if so can you tell me whether its a fair price?

also have you got any ideas of modifications that could make this car look amazing

[rey]

looks good jord, we need to go get some pics, me, you, possibly baker and sean if theyr up for it!

[Jordy6969]

yer mate that sounds like a good idea maybe do it this weekend or something, got the standard grille today and it needs a touch of back to black i rekon to get it looking good :) also i need to go to the breakers to get some screws to fit it :y:

[Jordy6969]

Went up to herne bay today to drop off some saxo parts and he decided to wack the camera out, got some goodens so i thought i would post 'em up so you can get more of an idea of what the sax looks like

by the way i have recently just fitted a standard petrol cap after my long frustrating time looking for one

http://i458.photobucket.com/albums/qq304/ingram690_123/14032009123.jpg

http://i458.photobucket.com/albums/qq304/ingram690_123/14032009124.jpg

http://i458.photobucket.com/albums/qq304/ingram690_123/14032009125.jpg

http://i458.photobucket.com/albums/qq304/ingram690_123/14032009127.jpg

http://i458.photobucket.com/albums/qq304/ingram690_123/14032009126.jpg

have a look and tell me what you think...

[char]

Nice (y)

[jacco]

i really like the gold saxo's they are growing on me so much,
sorry to hear about hte red saxo also another of my favourite colour saxo's ,
hope all go's well with this one. looking good already

[Jordy6969]

i really like the gold saxo's they are growing on me so much,
sorry to hear about hte red saxo also another of my favourite colour saxo's ,
hope all go's well with this one. looking good already

yer the wicked red one was a great car and i was so gutted when i crashed it, but shit happens...

both are great colours but quite hard to get parts for them which is the down side :n:

[rey]

nice blurry pictures ;)

[SaxoAL]

like it matey :y:

[VTRacer]

looks good mate, mirror caps would def finish the outside.:)

[SSN869]

Bad accident....
New VTR Let's hope for the best..

[Jordy6969]

What do people think if i had a white and gold theme going, with the R alloys sprayed white along with maybe the rear "saxo" and "citroen"

Just an idea and thought it would be different because most gold saxos on here have the gold and anthracite theme

[Jordy6969]

Bad accident....
New VTR Let's hope for the best..

looks good mate, mirror caps would def finish the outside.:)
cheers for the comments, just want opinions really....

yer i have 2 mirror caps but they are off my old wicked red VTR but can easily be sprayed up when i have the time! just got to find a supplier of the paint...

also soon to have a decatted pipe on, but i am bit worried about the noise increase, just don't want it to be too loud :A:

[sam-dud]

the car looks pretty good actually, shame bout the red one. i think you should get some rear smoked jewels for the car ;)

[Jordy6969]

the car looks pretty good actually, shame bout the red one. i think you should get some rear smoked jewels for the car ;)

cheers for the suggestion but i don't really know if i actually like rear smoked jewels to be totally honest, if i was going to change the rear lights then i would stick mk1 standards on there or just smoke my own

but atm not my biggest priority as i have got to change the bearing just below the top mount as i have a knocking noise when i turn at slow speeds that i have tried to sort by replacing the top mount, and the ball joint..... proper fudging me off :wall:

[Rob-6]

like it alot how do you change petrol caps without having to use a different key?

[Jordy6969]

http://www.saxperience.com/forum/showthread.php?t=60948

thats a guide on how to remove the key,

and then once you've done that you can just pull the cap away from the mechanism part behind it :y:

[Jordy6969]

Cleaned the sax today and thought i would take a few pictures because it was looking very sexy!

I washed over the car with a hose and then used turtle wax and shine to go over it

I then dried it with a microfibre cloth and polished it up with meyr (I think thats how you spell it)

I then used back to black on all the trim

In the interior i used turtle wax apholstery spray cleaner on the seats and caprets and then used house polish on the dash, which turned out great :y:

I then finished it off with a nice forest fresh magic tree, beautiful :A:

http://i458.photobucket.com/albums/qq304/ingram690_123/SP_A0033.jpg

http://i458.photobucket.com/albums/qq304/ingram690_123/SP_A0034.jpg

http://i458.photobucket.com/albums/qq304/ingram690_123/SP_A0035.jpg

http://i458.photobucket.com/albums/qq304/ingram690_123/SP_A0036.jpg

I just wondered what the best stuff would be to use to get rid of tar that has basically melted onto your car?

[farry1988]

looks very nice!!

[Jordy6969]

looks very nice!!

cheers mate

[rey]

get either a clay bar, or autoglym tar remover :)

where did you clean it, that aint your house?

[Jordy6969]

get either a clay bar, or autoglym tar remover :)

where did you clean it, that aint your house?
I cleaned it at brads while he cleaned his new Golf Gti 2l, the trim came up really well i think

have to see it in real life though:y:

[rey]

ah right fair enough :y: I'll try and get down, but trying not to drive mine at the moment if I can tbh :(

[THEWEBB]

Looks nice mate

[Jordy6969]

ah right fair enough :y: I'll try and get down, but trying not to drive mine at the moment if I can tbh :(
whys that?! trying to preserve?

you drving to amo this tuesday? chipmunk is there and im earning some dollar :y:
Looks nice mate
cheers mate

[Freakin_Sweeet]

Looks gorgeous mate, Gold FTW!

[rey]

whys that?! trying to preserve?
you drving to amo this tuesday? chipmunk is there and im earning some dollar :y:


nope, fook doing an Amo run during the week! Going up there friday though I think...

And cos I've broken an engine mount, fooking thing :wall:

[Jordy6969]

nope, fook doing an Amo run during the week! Going up there friday though I think...

And cos I've broken an engine mount, fooking thing :wall:
fook me matt, every week there is something else wrong with your car,

it never used to be like that, your driving it into the ground!

jokey :p

[rey]

fook me matt, every week there is something else wrong with your car,

it never used to be like that, your driving it into the ground!

jokey :p

Its been like that since I bought it, fooking thing, does my head in!

I don't get why I still have the poxy thing at times, when I could be driving something turbo'd with cheaper insurance.. Madness

[Jordy6969]

Its been like that since I bought it, fooking thing, does my head in!

I don't get why I still have the poxy thing at times, when I could be driving something turbo'd with cheaper insurance.. Madness
you would miss it too much.... and plus theres still alot to be done

[Mattryann]

nice car shame about old vtr was really nice

[Jordy6969]

nice car shame about old vtr was really nice
yer i've had alot of comments similar, just makes me regret the crash even more really.... but gotta think positive now tbh :y:

[VTRelite]

the pictures of your clean car it was the bonnet not shut proper as it doesnt look like its sitting right??

[Jordy6969]

yer i need to get lined properly by a body shop because i have tried and failed

[baker556]

what a crapper....

[Jordy6969]

fuck off mate, it might be a shitter at the moment but in months to come it will be perfect

mark my word

[baker556]

fuck off mate, it might be a shitter at the moment but in months to come it will be perfect

mark my word

lol i was only joking pal i love ya really :hug:

[Jordy6969]

i've done a few updates since i last posted which i thought may interest you with the big one being spraying my wheels pug cossack grey.
I wanted a fairly quick job done and i was prepared to spend alot of my time on them in order to get it done quick... the steps i took was to prepare the wheel first off by rubbing the alloy down with high grit sand paper to get of the corrosion that had occurred on 3 out of 4 wheels i sprayed. After this i made sure all of it was smoothed out including doing wet and dry on the alloy, cleaned it off and then dried it with a towl. We then masked off the tire with newspaper and made sure none of it was showing. we checked to see if there was any dust and continued to wipe it off. We applied 2 coats of primer and waited for a couple of hours before we rubbed it down prior to applying 2 coats of pug cossack grey spray paint. we then waited for around 2 hours until lacquering the alloy twice around.

i did this for each wheel and overall i am happy with the results and i think it goes really well with the car :y:

I also resprayed my wiper arms black as some of the original paint had worn off as well as spraying my citreon chevrons the same colour as i sprayed the wheels

I will post some pictures up after the weekend of the wheels and the whole car when it is washed and polished up because you have to wait a week for the lacquer to harden properly before you can use any cleaning products on the wheels.

[rey]

hurry up with the pics you penix..

I want to see my handiwork ;)

[Matty]

Some black alloys would look the dogs mate :y:

[rey]

they've been done grey pal

[baker556]

Fail on spraying the chevrons !

win=De-wiper

[Jordy6969]

nahhh mate they look good, just because yours look shit

[luke1988]

new vtr looks good mate, shame about the old one! get some pics up of those wheels...:y:

[Jordy6969]

Right. . . This is first update in ages because I was living at University of East London and wern't insured on the car, but now I'm living at home so Ive got the car back

I have done quite alot since my last post including;

-Sprayed my R wheels cossack grey

-Fitted new falken tyres which I got from www.camskill.co.uk for £180 which I thought was a good price including postage

-Changing cambelt and offside driveshaft done by french specialist KrisB - highly recommend.

-Bought new pressed plates and fitted

http://i458.photobucket.com/albums/qq304/ingram690_123/P1000827.jpg

-Bought some aero wiper blades

-I then thought I might aswell see if Ferg's selling his old exhaust and he was so I purchased this and fitted it saturday, cheers pal. This exhaust decatted my car and sounds LUSH may I add, I was straight down dartford tunnel :y:

-I also have re-sprayed the black bump strips all round the car because some of them were starting to fade

-This week I will be purchasing new droplinks and some track rod ends

-New dampers are going onto the car soon as well as the current standard ones were down 80mm and i had to use the same ones after I raised it to 40mm on the back. they creak and are pretty f***ed up imo

http://i458.photobucket.com/albums/qq304/ingram690_123/P1000829.jpg

http://i458.photobucket.com/albums/qq304/ingram690_123/P1000830.jpg

http://i458.photobucket.com/albums/qq304/ingram690_123/P1000831.jpg

http://i458.photobucket.com/albums/qq304/ingram690_123/P1000832.jpg

http://i458.photobucket.com/albums/qq304/ingram690_123/P1000833.jpg

http://i458.photobucket.com/albums/qq304/ingram690_123/P1000834.jpg

http://i458.photobucket.com/albums/qq304/ingram690_123/P1000835.jpg

http://i458.photobucket.com/albums/qq304/ingram690_123/P1000836.jpg

http://i458.photobucket.com/albums/qq304/ingram690_123/P1000837.jpg

The VTR has recently passed its MOT with one advisory; slight movement in offside strut, which I was personally happy with. Anyone got any ideas of how to sort this as it causes the car to knock on occasions, really annoying as had this noise since i purchased the car, and have changed almost everything that it could be including; top mount bearing, driveshaft, ball joint, droplinks and track rod ends (getting purchased this week), just hope that sorts it otherwise I have one other option that I could have faulty spring on the strut... need ideas asap.

If look at the pictures you can see my bonnet looks like its bent, well the previous owner obviously wern't that educated because instead of sorting out a simple bonnet catch problem, they decided to try and use shere strength to try and rip it up, causing the front to bend slightly. I am going to try and bend it back before i resort to buying a new bonnet, never know might actually work

[Claireeyy]

pictures are not working dude :n:

[Jordy6969]

pictures are not working dude :n:
sorted it :y:

[rey]

It needs a new bonnet Jord, you know it does ;)

Exhaust is sitting pretty man!

[baker556]

you forgot to add, power steering pump,

Also Baker556 helped me fit this power steering pump and my new exhaust :D

To be fair mate you need more decent pictures you chose the wrong time of day for them, doesn't do it justice...

Actually loving the quote in your sig also lol ;)

[johnyh]

not too keen on the wheels, look like faded black. but each to their own.

[moxy89]

i like it mate good effort

[Jordy6969]

It needs a new bonnet Jord, you know it does ;)

Exhaust is sitting pretty man!

Yer but not worth getting a new one until I try to sort it, if not then yer I will have to fork out some wonga for a new one

Its very pretty to say the lightest

you forgot to add, power steering pump,

Also Baker556 helped me fit this power steering pump and my new exhaust :D

To be fair mate you need more decent pictures you chose the wrong time of day for them, doesn't do it justice...

Actually loving the quote in your sig also lol ;)

Oh how could I forget to mention the power steering pump for the amount of effort we put in until 2am,

Yer but to be honest just wanted to put up some long overdue pictures up, didn't give a shit if it was overcast lol

not too keen on the wheels, look like faded black. but each to their own.

Yer fair point, they probably look like that because I didn't clean it, they come up much better with a bit of detailing imo

cheers anyway

[johnyh]

get a clean pic up then ;)

[crooksyVTR]

Big fan of gold saxo's but not a fan of the wheels, they just look like very dirty standards imo. Like the new exhaust though, old one was far too big!

[Jordy6969]

Big fan of gold saxo's but not a fan of the wheels, they just look like very dirty standards imo. Like the new exhaust though, old one was far too big!

They are dirty, no point proper making an effort until the whether gets better

[rey]

Even my car is clean! Sort it out!

[Jordy6969]

Even my car is clean! Sort it out!

If your car is clean then everyones car on this site should be :y:

[rey]

If your car is clean then everyones car on this site should be :y:

Exactly, my car is never clean!

[baker556]

Actually reckon you should paint these wheels gloss black, would really suit it...

[Jordy6969]

Actually reckon you should paint these wheels gloss black, would really suit it...

Nahhh want VTS' wheels bruuv

[Jordy6969]

Gave the car right detailing today, just makes me and hopefully bending the bonnet back to normal. Love the car when its clean, pictures will be up tommorrow because the colour has proper come out. Also stripped the back so I could properly clean it up. Going to keep my sub out as I'm tired of it now!

Fitting my new droplinks tommorrow with baker556 so will post up progress and pictures in next post

[Jordy6969]

Right I cleaned it, the process was a hose down, Autoglym body shampoo and conditioner, dry with a leather chamois, Autoglym super resin polish which really brought out the colour, and used some average wax on just to keep away the rain, finished with a splash of back to black, few pictures of the car with the bonnet partially fixed and clean

Also fitted new droplinks so a few in there, in the process there was a seriously rounded bolt - hello angle grinder which was fun!

Also refitted my nearside cv boot with jubilee clip because the metal clip had broke off

http://i458.photobucket.com/albums/qq304/ingram690_123/P1000842.jpg

http://i458.photobucket.com/albums/qq304/ingram690_123/P1000841.jpg

http://i458.photobucket.com/albums/qq304/ingram690_123/P1000845.jpg

http://i458.photobucket.com/albums/qq304/ingram690_123/P1000844.jpg

http://i458.photobucket.com/albums/qq304/ingram690_123/P1000843.jpg

http://i458.photobucket.com/albums/qq304/ingram690_123/P1000849.jpg

http://i458.photobucket.com/albums/qq304/ingram690_123/P1000847.jpg

http://i458.photobucket.com/albums/qq304/ingram690_123/P1000846.jpg

http://i458.photobucket.com/albums/qq304/ingram690_123/P1000853.jpg

baker556's car...

http://i458.photobucket.com/albums/qq304/ingram690_123/P1000852.jpg

http://i458.photobucket.com/albums/qq304/ingram690_123/P1000850.jpg

http://i458.photobucket.com/albums/qq304/ingram690_123/P1000855.jpg

http://i458.photobucket.com/albums/qq304/ingram690_123/P1000854.jpg

http://i458.photobucket.com/albums/qq304/ingram690_123/P1000851-1.jpg

[Jordysport]

Looking Good, but your stealing my name :P :P

With the drop links did you try a crowbar or prybar behind the droplink with the Impact wrench? that works a trick for me when doing them. :y:

[baker556]

Haha, nice picture of my behind lol

We used the breaker bar to to push the anti roll bar down, as the crowbar slipped when i did my car the other day.

[Jordy6969]

Looking Good, but your stealing my name :P :P

With the drop links did you try a crowbar or prybar behind the droplink with the Impact wrench? that works a trick for me when doing them. :y:

I actually checked the dates of when we both joined, and yes you beat by a couple of months lol

[Jordysport]

I actually checked the dates of when we both joined, and yes you beat by a couple of months lol

Muhahaha

Haha, nice picture of my behind lol

We used the breaker bar to to push the anti roll bar down, as the crowbar slipped when i did my car the other day.

Nah not acting downwards i mean actually getting the crowbar behind the actual ball on the top mount, but yes some you have to grind.

[rey]

I actually checked the dates of when we both joined, and yes you beat by a couple of months lol

Not on your original account he doesn't ;)

[Jordy6969]

Not on your original account he doesn't ;)

Oh yer I forgot I had an orginal one, why did i stop using that in the end


Buying a rallye inlet tonight so should be getting it this week, and I've be told it runs sweet with the early silvertop well so looking forward to no problems hopefully, anybody got any advice when fitting these?

[rey]

Oh yer I forgot I had an orginal one, why did i stop using that in the end


Buying a rallye inlet tonight so should be getting it this week, and I've be told it runs sweet with the early silvertop well so looking forward to no problems hopefully, anybody got any advice when fitting these?

You forgot the password.

When doing inlets, just make sure you don't have any air leaks or it wont run right. Think there's something you have to do with the throttle cable but don't quote me on that...

[Jordy6969]

When doing inlets, just make sure you don't have any air leaks or it wont run right. Think there's something you have to do with the throttle cable but don't quote me on that...

Yer you have to replace the saxo one with a throttle cable from a 106, but Im buying one thats already been adapted to fit a VTR, so everything should be okay

[Jordy6969]

WoW Just forked out £160 for Bilstein front and rear shocks, worth it?

I've heard Bilstein are one the best out there, just hope they make a difference as going on track soon!

What do you rekon?

[Jamie]

Ive heard they are very good, thought they were more expensive tbh

[Jordy6969]

Yer I thought that before I looked, we'll see how much of a bargain they are when I fit ;)

[Jamie]

Will look nice lowered!

[Jordy6969]

Will look nice lowered!

It is lowered lol, just everything in the back came out for a clean, including sub, sound proofing, rear seats and door cards etc.

When its all together it sits at 40mm

[rey]

What Bilsteins? B8s?

[Jordy6969]

What Bilsteins? B8s?

Erm the only shocks kamracing sell which I'm assuming is the b8's?

[rey]

Erm the only shocks kamracing sell which I'm assuming is the b8's?

If it's just shocks alone they sell:
B4's
B8's
Group N's

Did you get em from Kam? If so then B4's...

[baker556]

^ agreed when you told me i was unsure of what type, must be B4's

http://www.kamracing.co.uk/index.php/citroen/citroen-saxo/saxo-suspension/shock-absorbers/citroen-saxo-bilstein-b4-dampers.html

[Jordy6969]

Yer guessing there the B4's as got them off kamracing

[Jordy6969]

The knocking has dissppeared, wheyyyy! A year try to get rid has finally paid off, the front shocks that were on my car were made by "Lip" or something and it turned out that these were at fault, fitted new g-max springs at the same time of fitting the shocks and dampers

But now I have another one.......... Pictures to come of rallye inlet in the engine bay coming up

[jeffchiz]

i want pics of the inlet lol i wanna see how it looks, did it get to you alright mate?