View Full Version : Central locking is possessed
AL-J
19th October 2008, 16:19
I've got a 1998 vts all standard. Most fun car I've ever owned.
Until this morning whilst driving the central locking started locking and unlocking 7 times every 2/3 mins. It does have an alarm and immob but the fob didn't come with the car. tried wd40 on all moving parts incase anything sticking, no joy. Any ideas
fkvtr
19th October 2008, 17:30
Check that there is no corrosion caused by dampness on the sensor circuit board. Its beside the sunroof winder. Water got into mine and the car locked/unlocked itself all nite until the battery ran out! A quick rub of the circuit board with steal wool sorted it out. Mite be something different but worth a try!
jacko87
19th October 2008, 17:45
:O that's insane that, mine would lock at all before - turned out i needed a new battery - good luck with getting it sorted mate
bluearmy
19th October 2008, 18:49
Check that there is no corrosion caused by dampness on the sensor circuit board. Its beside the sunroof winder. Water got into mine and the car locked/unlocked itself all nite until the battery ran out! A quick rub of the circuit board with steal wool sorted it out. Mite be something different but worth a try!
how did you get to the sensor circut board mate
AL-J
19th October 2008, 19:14
Cheers gents! Will let you know how it goes
fkvtr
20th October 2008, 10:29
Bluearmy, To get to the circuit board you have to take off the whole surrounding. Its pretty easy to do. You just pop out the light, the spotlight and the wee cover that covers the sensor. It comes off by squeezing both ends of it. You then take off the sunroof winder, think its held on by a torx screw. Once this is off you will be able to get to the board to which the sensor is connected.
AL-J
20th October 2008, 13:06
Cheers fkvtr !!!!!!!!Gold star
Cleaned circuit up. RESULT well improvement at least. Door locks back to normal but hazards flash rapidly when I open the door or turn the ignition on
So i'm trying to price a new sensor circuit
jacko87
20th October 2008, 13:10
atleast your getting somewhere mate! good luck!
fkvtr
20th October 2008, 13:19
Glad that helped! As for the hazards goin off, i dont think that would be caused by the sensor circuit board, sounds more like dampness is shorting the fuses. Take a hair dryer to the fuse box in the passenger side footwell fusebox. This will dry it out if ther is dampness. I mite be totally wrong but its worth a go!
vBulletin® v3.8.2, Copyright ©2000-2025, Jelsoft Enterprises Ltd.