paint blending?

[wigansaxo]

its not a saxo but the advice could be used on a saxo so here goes:
http://www.saxperience.com/forum/showthread.php?t=185223
i tried that section but didnt get any responce, will get pics up later
thanx

[wigansaxo]

comeon someone must have had a little bump lol

[pepper953]

ok you have had a scape???or ya mum!!!!
sand down the scuff with 240 W/D prime
then flat with 800 W/d
go further than you intend to spay with 1500 w/d
approx 6" then apply colour to affected area
till it seems ok ,now fade colour into unaffected
area ,laquer ,then use fade out thinner to the edges
of the laquer when dry polish
sounds easy but its NOT

[wigansaxo]

ok you have had a scape???or ya mum!!!!
sand down the scuff with 240 W/D prime
then flat with 800 W/d
go further than you intend to spay with 1500 w/d
approx 6" then apply colour to affected area
till it seems ok ,now fade colour into unaffected
area ,laquer ,then use fade out thinner to the edges
of the laquer when dry polish
sounds easy but its NOT


my mum, thanx thats what i got told but in more detail, needed to here it of someone else