Exterior Door Panel

[picklesayrshire]

Can any1 give me some information on changing the exterior lower door moulding. ive gathered its just a clip job but just makin sure. many thanks in advance

[Spanky]

Yep your correct, just clips :)

Take the interior door card off to view them :)

[willsy]

Clips on the top and bottom but on numerous occasions ive come across them with tiger seal (or similar bonding agent) in a vertical strip up the sides.

If you pull the clips out, get a stanley knife blade and then you should be able to get in just enough to start sliding through the stuff until it comes off.

[reevesy_vtr]

not just clips on the rear mouldings as there is a 10mm bolt at the top corner closest to the door, i found this out the hard way when i had my rear arches cut. you need to get your arm in behind the inner rear cards with a 10mm spanner.