PDA

View Full Version : Clonkey door.....


Spanky
15th November 2008, 12:58
Hey guys.

Well i think my passenger door needs some sort of grease on it or somthing as its become VERY clunky....

If you open it fully it seems to have 3 stages to shuting.

push it round and it gets stuck then moves again gets stuck then moves and shuts.... if that makes sense lol

Just wondering where would i grease it to make it all smooth again??

Cheers guys :y:

Jackman
15th November 2008, 13:15
I believe that is your check strap on its way out.

Get it sorted ASAP or it will start to dent the door!

I'm sure there is a guide on here on how to change them!

Spanky
15th November 2008, 13:20
Hmmm i dont even no what a check strap is lol.....

Are the expensive?

Jackman
15th November 2008, 13:22
http://cgi.ebay.co.uk/PEUGEOT-106-SAXO-DOOR-CHECK-STRAP-NEW-ORIGINAL-ITEM_W0QQitemZ250274695138QQcmdZViewItemQQptZUK_Ca rsParts_Vehicles_CarParts_SM?hash=item250274695138&_trksid=p3286.c0.m14&_trkparms=72%3A1301|66%3A2|65%3A12|39%3A1|240%3A13 18

Spanky
15th November 2008, 14:09
Cheers mate

Anyone no how to fit these ???

ldavies
15th November 2008, 14:19
i had a problem simular with mine mate.
just sorted it out yesterday, i thought it needed some oil or wd40 on it but when i checked it there was 2 nuts that are on the hindge that had come really loose si i tightened them back up and now when you open the passenger door theres no squeek or cluntch.
hope this helps.

bluearmy
15th November 2008, 18:49
as above check all nuts on door hinge area i had this prob too and all it was, was a couple of loose bolts

Spanky
15th November 2008, 18:54
Cheers guys, ill have a check of the nuts and bolts etc etc tomorow and if they all fine ill look into geting a new hinge.

Am i correct in thinking im checking the nuts at where the hinge joins to the car, not the door, or should i check them all??

Thanks again guys :y: