fitting dials and bulbs

[sammyd]

has anybody got a how to guide for fitting dials and dial bulbs its just im getting a kit for christmas want to go from green to illumious blue lol

pictures if possible please its for a 1.1 1999 mk1 saxo

cheers

[imydaking]

here you go mate plz search next time lol http://www.saxperience.com/forum/showthread.php?t=73370&highlight=change+leds

[sammyd]

sorry mate thanks alot

[jdizzy]

but that thread don't show it how to do it on a mk1

[sammyd]

yea lol its just before i buy the kit just want to know how to do it lol

does anyone have it done on a mk1 with a how to guide or how meny bulbs it needs
thanks will be givin as i cant give rep lol

[Spanky]

dont hold me to this, but with a mk1 im SURE its jst bulbs behind the dash NOT LED's

So you would follow the guide which has been posted but you wil be lucky enough to just have to swap bulbs over and not solder LED's!

Should be able to find out what kind of bulbs they are from citroen then start loking for the same type but in blue.....

Dont hold me to that though mate, but im 95% sure lol

[Yates]

Karl could be right, unsure if some of the mk1s had the leds behind

if your dash clocks are white you can, if they are black/blue i dont think you can

[Spanky]

Karl could be right, unsure if some of the mk1s had the leds behind

if your dash clocks are white you can, if they are black/blue i dont think you can

Im sure they are yana, pred would clear this up if he seen it lol

[jdizzy]

Karl could be right, unsure if some of the mk1s had the leds behind

if your dash clocks are white you can, if they are black/blue i dont think you can

so if they are bulbs then I can just take them out and replace with led's?

[Spanky]

so if they are bulbs then I can just take them out and replace with led's?

no no no

If they bulbs you take them out and replace them with different colour bulbs lol

[jdizzy]

no no no

If they bulbs you take them out and replace them with different colour bulbs lol

lol I was ment to say bulbs not LED's lol

[sammyd]

lol y doesnt someone else try it before i do incase i mess it up lol

[jdizzy]

I don't know how to get the dials out! lol had ago this morning!

[sammyd]

lol read hynes manual you take the steerting wheel off then theres two screws under it and two above where the top casing is and thats all i think i read the book lastnight to see how

lol

[PETE-VTR]

lol y doesnt someone else try it before i do incase i mess it up lol


have you ordered the little tiny square LEDS? if so your going to in for a suprise my friend the mrk1 is BULBS not LEDS,

also changing the colour of the bulbs just looks shite im afraid because the colour filter is green!

so you will have to buy another facia for you dials with the BLUE filter in it.

NOT blue bulbs.

hope this has helped fella i know its a twat i did exactly the same!!:wall::wall:


PETE-VTR

[sammyd]

do you mean new dials like white and so on?

I was going to get white dials and set of blue bulbs

thanks