Team Dynamics Pro Race

[khurram65]

I can get these wheels but they have come off a Ford KA...i would have thought that they have a different stud diameter? 4x100pcd??? whereas a saxo has 4x108pcd? Would they fit??? Help Please!.....

[Curran]

fords are 4x108 also. its the offset thats different so you will need 20mm spacers minimum to fit them. you could use upto 40mm and they will still fit ok in the arches of a saxo.

[khurram65]

but i will defo need spacer right?

[Ryan]

deffo need spacers

[jamiemol]

depending how far you go think you'd need longer bolts aswell

[Goodwrench]

Centre bore could be too small also.

[Curran]

you will certainly need spacers. you can try without but you wont be able to bolt the wheel to the hub, it will just hit the strut.

i wouldnt recommend using extended bolts with 20mm spacers. get the type of spacers which use an extra set of bolts to bolt them to the hub first, then you bolt the wheel to the spacer.

centre bore wont be a problem. this should also be corrected with the spacers. just get the correct spacers.

[khurram65]

sorted, ive bought some black pro race 1.2's some scuffin on a couple of the alloys, the rest are fine,2 low profile tyres,2 without....£160

just need spacers now!

mk1 vtr green saxo with black pro 1.2's, look alright???