How Low?

[Eskimo]

Im lowering my Westie soon, next week or so, just thinking how low to go?

50mm All round ? Also link for Front Springs? Or just eBay ?

Also the Clips? There White? Any tech name for them or just clips? :) For the Arch's Etc...

[Eskimo]

Also What are the Circle Stickers which go around wheels called? (On Alloy)

[carl_hughes]

get the apex springs of kamracing 50mm

[pimpin-vtr-boi]

just called trim clips i think there the same as the door card ones aswell

[Tsaxovtr]

apex mate :) all day long

[Tsaxovtr]

http://i424.photobucket.com/albums/pp321/tsaxovtr/DSC01130.jpg

50 on apex mate

[Eskimo]

We recommend that these are fitted along with with shortened shock absorbers.

Did you guys get or ?

[VTR-Chris]

60mm on spax, 65mm rear

only got done 2 days ago so the front will lower even more!! an its practically touchin the ground alredy lol

http://img231.imageshack.us/img231/4154/dsc00034zl4.jpg

[Richy25988]

We recommend that these are fitted along with with shortened shock absorbers.

Did you guys get or ?

Depends on how much you want to spend tbh, but if your changing the springs its recomended to get a kit that comes with shocks too, ive had a look around and i found a good pair of springs and shocks for 200 quid, spax too iirc.

[GabbaKid]

Drop it on its arse.. lower the better I say..

[VTR-Chris-VTR]

lower the better aswell, it more for looks then handlin if u go really low

I just ordered some P.I Springs £57 delivered 60mm drop and going about 80mm on the rear like my old VTR

http://i83.photobucket.com/albums/j314/mdbchris/Photo0053.jpg

http://i83.photobucket.com/albums/j314/mdbchris/SP_A0395-1.jpg

[saxokid100]

Slamm it if you just want it for looks.............:y::p

[Phsyco_Paff]

lower the better aswell, it more for looks then handlin if u go really low

I just ordered some P.I Springs £57 delivered 60mm drop and going about 80mm on the rear like my old VTR

http://i83.photobucket.com/albums/j314/mdbchris/Photo0053.jpg

http://i83.photobucket.com/albums/j314/mdbchris/SP_A0395-1.jpg

i think ull find dats a mk1;)

[tomo2k8]

go 60mm on the front mate and go 95mm on the bk get it on its arse but its rely up to you mate its whatsever your going for looks or handling mate :y:

[blackvtrt]

lol at half the people's suggestions in this thread, no, no and no, u wanna go low take a look at lee's car then u can see how to do it properly. If ur gonna lower it on springs atleast get uprated dampers, if ur gonna lower it 50-60mm get shortened dampers aswell. When I measured the front to rear difference on mine it was 15mm higher at the back than front so if u want it level go for abit more on the back, but knowmore than 15mm reverse rake= fail. Just becasue u can drop the back quite low deosnt mean u shud looks stupid when the front not as low!

[Tillett89]

u still looking for vts alloys?