what spacers do i need?

[infinitym4ge]

Im fitting my 3 stud alloys with 195/45/15 tyres to a 1.1 flat arch on the rear.
there are somany different ones but which spacers do i get?

[AlexB]

dependant on the et of the wheels

[infinitym4ge]

sorry im a total noob here.. et?

i just want to get the god dam things fitted, funding is not a problem.

[gjs]

he means the offset,if they are for a saxo they should be ok if they are off another make ford etc you will need spacers,to make up the difference.The internet is full of everything you need to know about anything,use it;)

[AlexB]

3 stud
so wont be ford wheels ;)

usually 3 studs will be fine to go on as there only really made for a few cars

[infinitym4ge]

nah they fit fine on the saxo now the front alloys are on there is just some rubbing on the inside of the rear wheels so im thinking about 15mm?? will do it but which ones to get? would any 3 stud spacers do? thats the thing i dont know =(

[infinitym4ge]

??will these work?? (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=220339375504&cguid=2b1f756011e0a0e204e73927ff790fb2)

http://img.photobucket.com/albums/v82/zimsabre/100_0517.jpg

[AlexB]

if its just slight rubbing you wont need 15s mate

might only need about 5mm

i had scrubbing so bad my rear wheels wouldnt spin on my 1.1 when i fitted 7j 16s to it
fixed with 3mm spacers

[infinitym4ge]

bought some 3mm spacers if hey work great if not oh well £15 was worth a shot.

[AlexB]

well 3mm made mine work

honestly if its just a scrub theres no need for much more than 5mm

[infinitym4ge]

can you put 2 together to make it 6mm? (just incase) or is it advised not to?

[AlexB]

i wouldnt put 2 spacers together no