PDA

View Full Version : Refurbing alloys & putting a red lip ?


si_pow
31st January 2009, 20:59
Hey guys n gals,

Refurbed my black 106 raptors a month or two ago, and i cut corners. I'm going to them to a bodyshop and ask them to smooth off the Pug badge. How much do you think this will charge?
After they've done this, i want to do it my self properly and was wondering can i use this..
http://cgi.ebay.co.uk/9mm-wheel-striping-rim-tape-L-K-red_W0QQitemZ370137779981QQcmdZViewItemQQptZUK_Mot orcycle_Parts?hash=item370137779981&_trksid=p3286.c0.m14&_trkparms=72%3A1689%7C66%3A2%7C65%3A12%7C39%3A1%7C 240%3A1318
to put a red lip around my wheels?

thanks alot.

mufcdouble
31st January 2009, 21:30
yes that would be ok,y not try painting it on with a brush carefully

si_pow
31st January 2009, 21:40
yes that would be ok,y not try painting it on with a brush carefully

Because if i screw up with a brush ive f*ked the whole wheel up. If i use a sticker, i can peel it off :y: Im crap when it comes to DIY.

Anyone used this tape before? Hard to use?

Anyone know how much id be looking at to get it refurbed?

rayray1987
1st February 2009, 09:51
do the raptors have a solid lip to come off? like 1.2's and other wheels there is a nice flat square area to do it on?

si_pow
1st February 2009, 10:09
do the raptors have a solid lip to come off? like 1.2's and other wheels there is a nice flat square area to do it on?

Nah they dont mate. Dont think there is a lip for it really.

evans1089
1st February 2009, 11:56
I've done my vtr alloys, check progress thread. I used motocycle tape in a roll, and not precut lengths!

then laqured over it :y:

-Jason-
1st February 2009, 12:07
The raptors dont have a raised lip so spraying them will be a nightmare as you will have to mask off a perfect circle on all 4 wheels if you have a wheel with a lip its easy

Some of my old work

http://i190.photobucket.com/albums/z92/jasonvts88/Jasons%20GTI/Photo-0205.jpg
http://i190.photobucket.com/albums/z92/jasonvts88/Random/Photo-0030-1.jpg
http://i190.photobucket.com/albums/z92/jasonvts88/Random/Photo-0036.jpg

si_pow
1st February 2009, 12:36
Looking good there Jason. Really like them first ones. Have any idea how much a bodyshop would charge, to sand the Pug badge off?

-Jason-
1st February 2009, 13:04
Tbh not sure I would charge £50 for all 4 to remove and smooth the badges