bluearmy
1st February 2009, 19:24
posted this in styling and interior but not had much responce, so will give it a go here
ok i have picked up a cheap used set of TSW reflex alloys for my vtr thing is when they are on the car the distance from the front of the caliper to the inside of the wheel is 40mm where as on the standard vtr wheel it is 20mm. For a start the TSW are 10mm wider than the standard vtr one's so i guess that might account for some of it, it does not look as though i will need longer bolts also there is no spacers on the wheels , so basicly all i am asking is this ok. Cheers
Also looking insde the wheel it looks as if the offset says 25 and using the offset calculator in another thread i should need 3mm spacers
ok i have picked up a cheap used set of TSW reflex alloys for my vtr thing is when they are on the car the distance from the front of the caliper to the inside of the wheel is 40mm where as on the standard vtr wheel it is 20mm. For a start the TSW are 10mm wider than the standard vtr one's so i guess that might account for some of it, it does not look as though i will need longer bolts also there is no spacers on the wheels , so basicly all i am asking is this ok. Cheers
Also looking insde the wheel it looks as if the offset says 25 and using the offset calculator in another thread i should need 3mm spacers