View Full Version : Resetting ecu. Please someone help!
si_pow
10th February 2009, 17:28
Hey guyys n gals,
recently my car has been shaking LOTS during idle, it goes to stall when left but doesnt, it just sort of idles reeally weird and shakes the car loads. lol.
Ive done a little search and people said reset the ECU? Well i done that, and no better. It was only serviced last month so i dont know what it could be.
Please help?
could it be the air sensor going into the induction or something?
:n:
si_pow
10th February 2009, 18:30
sorry... Forgot to mention, the garage said that my car had a lot of back pressure which is why it was spitting oil (i think from the dipstick), anyone know what causes this?
Sparco_Tom
10th February 2009, 18:30
what did you do to reset your ecu? unplug the battery over night? check the spark plugs and there gaps. make sure all sensors are connected properly
Sparco_Tom
10th February 2009, 18:31
the oil out the dipstick sounds like a blocked oil breather. whip it off clean/check it
si_pow
10th February 2009, 18:35
I disconnected it for about an hour and then left to idle for ages. I presumed it worked because idle was awful to begin with then got better?
I had a big of a problem with it spitting oil, so i put a new breather filter on it, and its done it again. Only does it occasionally now though, and only a little bit?
Sparco_Tom
10th February 2009, 18:42
well thats not long enough 3-4 hours should do the trick for you. as for the oil im stumped how much oil is it burning
si_pow
10th February 2009, 18:47
well thats not long enough 3-4 hours should do the trick for you. as for the oil im stumped how much oil is it burning
I'll go disconnect it now and leave it over night then mate.
Ive had to wrap a bit of cloth around the dipstick to stop it squirting up so theres not that much now, but before there was loads. Mechanic said he sorted and it was due to alot of back pressure :s
rudkin69
10th February 2009, 18:48
I have the same problem! My mechanic told me my timing was out a tooth??? Im gunna try resetting my ecu tonight
si_pow
10th February 2009, 18:53
same problem with what.. idling or spitting oil?
How long do i leave the car to stand idling for after resetting the ECU mate?
si_pow
10th February 2009, 20:38
anyone please? Im going soon and need to know for tomorrow.
thanks :D:D
si_pow
10th February 2009, 20:57
... anyone!!
i disconnected the posetive too, thats correct isnt it?
Alexvtrmk1
10th February 2009, 21:18
i disconected mine for 10 minits and that done it for me when my tuneing was to hell and my idle was wrong and yes wanted to die. is your coil pack ok? theres not to much oil in the system is there lol
si_pow
10th February 2009, 21:21
ive disconnected both connectors now, (as everyone seems to say different things) so im going to leave that over night and see how we do!Hopefull that will sort it, as its only just started to happen on sturday.
sm1thyvtr
12th February 2009, 12:25
i the idling could be down too the idle control valve may need cleaning, for the burning oil i dont have a foggiest mate, you sure it def oil?
vBulletin® v3.8.2, Copyright ©2000-2025, Jelsoft Enterprises Ltd.