PDA

View Full Version : key fob


D8N_LL
20th February 2009, 21:34
hey, i have a 1 button key fob but the buttons broke on mine and the bits fallen out. could i buy a new/second hand fob and swap the internal bits for mine so that it doesnt need re-programming?

if not, how hard is it to re-program 1? thanks

liamparker89
21st February 2009, 14:40
mine did excatly the same,
what i did was take a similar button from something else, and buzz out where the PCB and i attached mod wire to the button and to the PCB and now mines working ok untill i can afford to have new ones made

D8N_LL
22nd February 2009, 01:16
huh :S

michaelw6
22nd February 2009, 09:53
you can get a fob off ebay for about £10, but it costs approx £40 from citroen to re-program it. only way im afraid mate. Unless you wanna start pulling two apart to make one.(the button inside has a little metal circle clip on it which the rubber button pushes down onto if you can save your pcb and change the switch which i have done takes about 10mins to do you will have one good fob).
Hope this helps you out!