The grommit for the amp wires need more

[huggy54]

Today I managed to get some AMP wires through the grommit on the front of the car but it was so tight, as I got 2 amps I need to pull more wires through (4 AWG) power cable and a next cable how the hell do i manage with the hole being so small, how did u guys do it. was tough jus doing 1 cable.

is it worth me getting a distribution block to help me out, plz guys help me out gimme some advice.

[Scott]

why are you running 2 4 guage??

cut the grommit to open it up more

[huggy54]

well i meant to say i gotta a 8 guage and 4 gauge wire i fit through the 4 guage but not yet the 8 guage. so a distribution block aint d ansa, and how do i cut open the grommit more, with wat

[Scott]

with a knife.

Still not understanding why your running a 4 guage and 8 guage cable? if its for two amps then just run the 4 gauge or a 2 guage or even a 0 guage if you can be arsed then use a distribution block to supply the power to each amp

[huggy54]

yep im running 2 amps, well im looking to as soon as i get all the wires through m8.

is the saxo battery enough to power 2 amps and a line driver.

oh yea do u know what power supply i need to power my vibe deltabox line driver

[Scott]

i would presume just a 12v input? well thats what my pheonix gold line driver takes.

Running two cables will just be a hassle when one larger one will do.

The standard saxo battery will struggle and you will most likely just get clipping at higher levels. Better to uprate the battery and the big 3 cables under the bonnet. alternator to battery, battery to chassis and engine earth.

4 guage or larger will be ideal