PDA

View Full Version : FAIL !!!!! bye bye :(


DJVTR
20th March 2009, 22:50
the VTR failed, suprise suprise lol failed because.....

Measurements
Breas failures: RBT service break efficiency: 0%, RBT Park break effiency: 0%
Reasons for refusal of a test certificate

001 front front position lamp(s) incorect colour

002 Rear registrtion plate deteriorated

003 Offside rear Rear passanger seat cannot be scured in the upright position.

004 Nearside front (stalk) seat velt insecurely fixed to the vehicles structure.

005 Offside front (stalk) seat velt insecurely fixed to the vehicles structure.

006 Nearside front headlamp not in good working order adversly effecting beam image.

007 Offside front headlamp not in good working order adversly effecting beam image.

008 Nearside rear tyre tread depth below requirements of 1.6 mm

009 Offside rear stop lamp not working

010 Rear sub-frame corroded and seriously weakened

011 Rear ( both ) suspention component mounting prescribed area is
exessively corroded

012 Rear ( due to dangerous condition of rear sub-frame) break perfomance not tested

013 Service break effiency below requirements

014 Parking break effiency below requirements

IMPORTANT

ADVISE VEHICLE UNSAFE TO DRIVE ON RAOD


SO QUITE A GOOD TEST OVERALL

saxokid100
20th March 2009, 22:51
How old is the saxo dude??

DJVTR
20th March 2009, 22:53
8 years

Bickerton
20th March 2009, 23:09
001 front front position lamp(s) incorect colour- Wrong colour bulb?

002 Rear registrtion plate deteriorated (get a new plate)

003 Offside rear Rear passanger seat cannot be scured in the upright position. (dodgy catch)

004 Nearside front (stalk) seat velt insecurely fixed to the vehicles structure.

005 Offside front (stalk) seat velt insecurely fixed to the vehicles structure.

006 Nearside front headlamp not in good working order adversly effecting beam image. (new headlight)

007 Offside front headlamp not in good working order adversly effecting beam image. (as above)

008 Nearside rear tyre tread depth below requirements of 1.6 mm (new tyre

009 Offside rear stop lamp not working (bulb)

010 Rear sub-frame corroded and seriously weakened

011 Rear ( both ) suspention component mounting prescribed area is
exessively corroded (linked to above)

012 Rear ( due to dangerous condition of rear sub-frame) break perfomance not tested

013 Service break effiency below requirements (linked to subframe)

014 Parking break effiency below requirements (as above)


This isnt half as bad as it seems matey, most this crap you bcan get from a scrappy

Sammy-Boy
20th March 2009, 23:13
Sorry to hear mate, mine failed the other week, but as said most of the stuff can be fixed easily enough

Mochachino
20th March 2009, 23:15
only problem is the rear subframe tbh.

EDWARDS
20th March 2009, 23:17
get down the scrappy u will soon take care of alot of them crappy bits they failed on mate

Bickerton
20th March 2009, 23:18
Get a quote from a garage on a subframe replacement, rest is a scrappy/haynes manual jobby matey. hope you still have 4 weeks left on your current MOT? or you a last minute kinda person?

DJVTR
20th March 2009, 23:22
well it ran out of tax and then mot it was a project car i got it for a grand

beau_4076
20th March 2009, 23:25
Get a quote from a garage on a subframe replacement, rest is a scrappy/haynes manual jobby matey. hope you still have 4 weeks left on your current MOT? or you a last minute kinda person?

doesnt matter how long is left, rules changed now, once a fail is issued it over rules any previous tests, and is not allowed to be driven.

WelshSaxo
21st March 2009, 01:39
could be worse, was takin mine for it's mot on wednesday, hit a pot hole & woop front spring snapped! :@

oh well new excuse for some eibach goodies now!

overall tho mate, it doesn't sound that bad, you'll be suprised how many wont cost that much to sort!

davidharvey
21st March 2009, 04:16
Rear subframe? you mean beam?
Or has mine corroded that badly that I dont have one?

Bickerton
21st March 2009, 08:51
doesnt matter how long is left, rules changed now, once a fail is issued it over rules any previous tests, and is not allowed to be driven.
bugger

DJVTR
21st March 2009, 09:13
Rear subframe? you mean beam?
Or has mine corroded that badly that I dont have one?

well you can see through my boot floor down to the ground lol and i have no driverside rear wheel arch

Bickerton
21st March 2009, 09:48
So it's rust, ye thats a common place :S

fossie
21st March 2009, 13:10
Never heard of a Saxo rotting that bad with that much rust like

Bickerton
21st March 2009, 13:11
Never heard of a Saxo rotting that bad with that much rust like
Not heard of it that much, but is a common place on 106's so assume same on saxos, below ECU is another place :D

ollsaxogti
21st March 2009, 18:20
iv never heard of rust that bad either
should'nt be too hard of a fix though mate :y: