wireing!!

[mtbrider0]

changed the starter motor on my 1.1 but ive forgotten where one of the cables connects. it's a cable from the + battery connector (not the actual battery connector). anyone got a picture of one wired up or a diagram please? if possible i need it tonight.

thanks. J.

[Phsyco_Paff]

changed the starter motor on my 1.1 but ive forgotten where one of the cables connects. it's a cable from the + battery connector (not the actual battery connector). anyone got a picture of one wired up or a diagram please? if possible i need it tonight.

thanks. J. get a haynes manuale it will tell you in there and also youve got it for any future work bein carried out also one last thing its a good idea to get diffrent color electrical tape with matching colour paints so you can put a bit of say red tape on one wire and black on anouther and blue on anouther and then dab a small amount of paint on the place u took it off of :drink:

[mtbrider0]

thanks for the advice bud. i think it'd be a good investment that ;P
i sussed it out in the end. there is actualy two + power cables to one of the bigger 13mm bolt's on the solenoid. and only 1 smaller wire to the 8 mm bolt (Y)

can delete this thread now.

thanks (Y)

[saxokid100]

haynes manuale is what you need bud.......:p