HELP Please - Car will not start

[MRTECHSYSTEMS]

Can some one help


I drove to the petrol station last was preparing to going out and pulled into pump and tried to turn the engine off the key was stuck so wiggled it about then thought I have enough petrol to get home so I drove back home about 2-3 mins away noticed the the power steering was a bit hard then going round a corner i could not hardly steer then it corrected it self anyway got could not turn the engine off so I took the connections off the battery and stall the car and thought I would sort it out on the morning.

Got up this morning googling away on how to remove the barrel from the car firend try to help me and had cracked this plastic part with a coil I think still could not remove the key so by now firend buggered off hehehe left me with it so I got a pair of piler anf WD40 I pull the key out test it again and can now move the key to turn it on and off but the engine is not turnning over

So far I try and turn the key the Key Code light comes on flashing on the dash and all the lights but the engine does not tick over as if it is dead

Please look at the photos do I need a new Transponder Aerial I think not to clever I am not a mechanic at all so any advice much appericated I have no car !!!!!!!

I have 2 keys normal key and a big Chunky key with a red sqaure patch on it

Just want the car to start

Cheers to all that help

Photo one this was around the ingition and snap now can I buy one or get one from the scrapy do I need to recode Thanks

Photo 1

http://s682.photobucket.com/albums/vv184/LeeBoden/?action=view&current=11042009003.jpg

I know I talk a lot but I hope you understand cheers

[666]

sounds like the barrals shot mate, when you turn the key it should make contact in the barral and turn electircs on, sounds like when you forced the key out it broke the conecsions inside, i would get a new barral (and key) from a brakers, it wont need programing as its just the barral(will mean a diffrent key to the doors thow

[MRTECHSYSTEMS]

Update connected the battery to the car the light come on and the KeyCode light is flashing is due to this aerial thing been broke

Thanks for the quick reply 666

[MRTECHSYSTEMS]

Forgot to add the cracked ingintion casing

http://s682.photobucket.com/albums/vv184/LeeBoden/?action=view&current=11042009.jpg

[saxo_kid18]

thats only the key chip reader i have a spare 1 if needed pm me it should start without that reader though

[MRTECHSYSTEMS]

Hi m8

Yeah that would be great mate cheers what details do you need m8 to send it

cheers

[MRTECHSYSTEMS]

oops sorry pmed you m8

Right so if I get a new barrel and this key reader that goes around the ingintion barrel the code light should go off and the engine should start sorry newbie at this just trying to start the car need for work next week cheers to all

Also if there is any in the area please could you pm me

[MRTECHSYSTEMS]

Bump.......