How To Re-Trim Door Cards

[DigFonzSaxo]

Hello lads,
I want to cover my door cards in high quality black leather.. does the centre part just pull from the back of the door card? As i can see loads of round plastic holes on the back, do they need to be drilled out?

Thanks :y:

[marcusd]

i found its better not to drill them out rather cut them as it leaves more plastic to put a screw into as u have to get really fat short screws anyway drilling them takes to much off and the screw goes thro the outside. just leave the top part which are melted on as the redone card will slot back into them fine and u just have to push the old rivits thro the card and screw back on, jobs a gooden. just don't use the spray glue, in the heat it all bubbles off, i used evo stick and it;s perfect