View Full Version : clonking noice since put new springs on
renchs
2nd July 2009, 12:27
when i turn there like a clonking noice coming from shock since i put new springs on what could this be cheers alex
WestyVTR
2nd July 2009, 12:27
top mounts!??
J222JRA
2nd July 2009, 12:31
drop links
WestyVTR
2nd July 2009, 12:32
did you put the wheel bolts in... lmbo
renchs
2nd July 2009, 12:33
yea everythings all tight
WestyVTR
2nd July 2009, 12:35
rubbers may be worn on links... when does it knock?
renchs
2nd July 2009, 12:58
only wen you put more than half lock on
renchs
2nd July 2009, 12:59
looked a ealryer and think the wishbone seal is split could that be it?
Phsyco_Paff
2nd July 2009, 14:00
did you just put lowering springs on or shocks and springs?
toms_vtr
2nd July 2009, 14:06
this is the same as my car..
think its a anti roll bar link..
L8R_VTR
2nd July 2009, 14:28
Yup as above i would say drop link mate, although you may be quite right in what you said about the wishbone but my money would probs be on the link rod you can get a pair off ebay for £15.50 delivered mate
frankie
2nd July 2009, 14:30
drop link are favourite.
had a clonking a while back, tightened em up and bye bye clonking
renchs
2nd July 2009, 21:15
ok so you rekon its drop link, what about the seal thats split?
renchs
3rd July 2009, 10:20
i only did one side as once the spring was fitted i relised they were the wrong ones not lowering springs and its only that side thats macking the noice now, also it pull's two one side sometimes when i put my foot down?
renchs
3rd July 2009, 21:30
so rekon its the drop links then?
J222JRA
3rd July 2009, 21:32
so rekon its the drop links then?
without a doubt mate
renchs
3rd July 2009, 21:36
ok ill get some ordered and hope that sorts it, how come they have gone if ive only un bolted them?
vBulletin® v3.8.2, Copyright ©2000-2025, Jelsoft Enterprises Ltd.