help with spacers...

[marc_mcquilling]

http://cgi.ebay.co.uk/CITROEN-SAXO-AX-ALLOY-WHEEL-20mm-SPACER-KIT-AND-BOLTS_W0QQitemZ350209653140QQcmdZViewItemQQimsxZ20 090604?IMSfp=TL090604158003r33919#ebayphotohosting

now then guys, seen these spaces on ebay...

will these fit on my vtr with standard wheels?

and will they cause extra strain on the hub/ axle?

will they give the car a better stance?

thanks in advance for any help with this as i dont have a clue on this.

cheers, marc.

[Simon]

They are for aftermarket alloys....So VTR rims won't work

The centre bore will be too big
plus the wrong bolts, you'll need flat seated one's not tapered.


EDIT : these ones should work, though I don't know what the quality is like
And you'll have to buy 2 sets
http://cgi.ebay.co.uk/Hubcentric-Wheel-Spacers-Citroen-AX-Saxo-Xantia-20mm_W0QQitemZ230334922724QQcmdZViewItemQQptZLH_De faultDomain_3?hash=item35a107ffe4&_trksid=p3286.c0.m14&_trkparms=65%3A12%7C66%3A2%7C39%3A1%7C72%3A1683%7C 240%3A1318%7C301%3A1%7C293%3A1%7C294%3A50

[marc_mcquilling]

could you recommend any that would work?

just been reading up on them and apparently the ones that bolt to the hub then the wheel bolts to the spacer are the best.

could you recommend any of this type?

cheers mate