Goat developments big brake conversion?

[jonathan]

This is aimed at Danny, who I understand has recently fitted this kit to his car, any advice greatlt appreciated.

[Dannysp8]

They are realy good mate, its well worth the money.. They only took me about 15mins per side as there is pretty much no grinding to do cause the brackets are realy well designed.. The only problem that i had was the bolts where a little short so i had to but some longer ones, but bucky has now sorted that so you shouldnt have any problems with them mate.. and they realy do look the part and make the std ones feel like shit !!!

[neilandhisvtr]

danny - is that with standard calipers or the uprated ones?

[KOTL_VTS16]

Any Pics??

[Bucky]

Bolts were my fault, I send 40mm ones instead of 50mm. DOH.



Pic's at www.goatdevelopments.co.uk

[Simo]

<img border="0" src= "http://www.bucky.justwiz.com/Products/rdiscs.jpg">





<img border="0" src= "http://www.bucky.justwiz.com/Products/bracketkit.jpg">

[jonathan]

Danny, from the instructions that Dave has e-mailed to me <img src= "smileys/happy.gif"> is the only grinding needed to allow the caliper and caliper bracket to fit snuggly over the bigger disc? Thats the way I read the instructions, anyway. Might just borrow my dads grinder and set to it on Monday.

[Bucky]

Jonathan,



Basically the caliper carrier sits over the hub carrier lugs and because the caliper will hit these lugs by about 3-4mm some has to be taken off each part.



You'll know what I mean when you go to fit them.



I havn't got an pictures yet but will have soonish.

[VTStef]

What does that set up cost, the ones above in the picture?