Are these Saxo Callipers?

[dannyboy2005]

Before i go and jack the car up and to see if these will fit i'll ask first.

I bought these of 106 OC. They are 3 Stud 106 Callipers.

IIrc, my old ones were flat and a bit smaller. Can anyone confirm. I can see it says ATE engraved on the calkiper but looks a bit different to my old ones.

http://i81.photobucket.com/albums/j222/micky_mouse007/P7050216.jpg
http://i81.photobucket.com/albums/j222/micky_mouse007/P7050218.jpg

[Richy25988]

They are the same as mine, vtr ones

[dannyboy2005]

Ok, Did Peugeot use a different calliper design to Citreon then?

[dannyboy2005]

Here's a side picture:

http://i81.photobucket.com/albums/j222/micky_mouse007/P7050217-1.jpg

[SteveWC]

They are the same as mine, vtr ones

Dont look my VTR ones? Mine are loads bigger

[dannyboy2005]

Overal size measures Aprox

7" x 4" (6" deep)

Don't worry. I'll go and check mine now.

[dannyboy2005]

Just went out and jacked the car up. At first instance my current callipers have a piston that goes from one side to the other. and it isn't bumpy, its smooth. I meausred like for like and the depth is the saame but the new ones are about 25mm longer then my current ones. I took a pad off the new ones to look at the are a bit bigger then the old ones (But do fit on the disc, taking th WHOLE disc up)

I tired to measure the holes where you bolt it onto the hub but couldn't get a accurate reading due to being caked in grub and at an awkward position. But i think they are simular, not 100% sure though.

[lakey_xs]

look like 106 gti/s2 rallye/vtr/vts probs more models

they use 247mm vented 4 stud disc so wont fit a 3 stuf disc

[Predator_R32]

There are different types of brakes

Bendix
Lucas
Teves

Each will have a differntly designed caliper

[kxhaz]

they look like a vtr/s calipper the 1.1 ones are totaly diferant they dont have a spring like those ones they have two little springs

edit: did they do a 3 stud 106?

[Predator_R32]

Yes they did a 3 stud 106

[kxhaz]

Yes they did a 3 stud 106

oooo i didnt know if they did
what was the point tho such a crap idear

[Bickerton]

edit: did they do a 3 stud 106?

For a little bit they did yeah

[dannyboy2005]

oooo i didnt know if they did
what was the point tho such a crap idear

To save weight lol.

So have i been mis sold these?

[LeeBBH]

oooo i didnt know if they did
what was the point tho such a crap idear

WEIGHT REDUCTION!
lol jokes :homme:

[dannyboy2005]

There are different types of brakes

Bendix
Lucas
Teves

Each will have a differntly designed caliper

These callipers are Made by ATE.
My current callipers are made by ATE too.

Offering them up like for like the new ones are huge. I don't have a piston going across these unlike my old ones.

[Mikol]

Dude those are VTS calipers, as said. Won't fit for shit.

Like I said on the 106oc, I'll see if I can get mine off the car tomorrow and you can have them.

[sam-b-]

they look the same as ive got on my furio.

[chinkostu]

look more like Bendix calipers to me, my bro's 106 has them

mine are more like this:

http://www.eurocarparts.com/ecp/c/Citroen_Saxo_1.1_1999/p/Car-Parts/Brakes/Brake-Hydraulics/Calipers/?133545071&1&10937d240ac2a381b5d05ea2396f6cc0c32d889d

[Mikol]

Chinko they're deffo VT* calipers.

I have both the calipers in your link, the bendix calipers AND VT* calipers in my garage and I can safely say they are the latter of the three.

In response to the OP, for a 106 they must be 106 GTi brakes, never designed for a 3 stud 106, as they would never fit onto the struts.

[chinkostu]

Chinko they're deffo VT* calipers.

I have both the calipers in your link, the bendix calipers AND VT* calipers in my garage and I can safely say they are the latter of the three.

In response to the OP, for a 106 they must be 106 GTi brakes, never designed for a 3 stud 106, as they would never fit onto the struts.

ok cheers, wasn't too sure. similar shape tbh!

in honesty, of all of the pugs outside and my saxo, none of them have the same calipers!!