In the middle of removing my dash and............

[Sean_VTS]

Afternoon all.

Im in the middle of remving my dash..........

So far ive done the following:

1. Removed centre console and switches
2. Removed steering wheel and dials
3. Taken off the shuttle panel
4. Taken out wiper moter
5. Removed the 3 nuts that hold the dash in place by the wiper moter
6. Removed the 2 screws close to where the door hinge is on either door.

Now im stuck. The dash wobbles but doesnt seem to want to come out.

What am i missing?

Any help would be great as i am doing this right now :S

Thanks Guys :y:

[TIPSY]

one in the middle. its like a bar that goes down to underneath the gearstick console. 13mm bolt IIRC

[Sean_VTS]

one in the middle. its like a bar that goes down to underneath the gearstick console. 13mm bolt IIRC

Then it should just sort of pull out yes?

Cant believe that was all i was missing if thats the case!

Thanks for the very quick reply though mate :y:

[TIPSY]

should do m8, let me know

[Sean_VTS]

should do m8, let me know

I had to remove the bolts that connected that metal bar to the steering column aswel mate but she seems to be out now anyways.

Just got to disconnect air bag on passenger side etc then its job done.......................................i hope :homme:

[Sean_VTS]

Dash is out thanks for your help buddy :)

[TIPSY]

no bother. its the bit i always forget too. dash coming out and staying out or is it all part of a work in progress??? lol

[Sean_VTS]

no bother. its the bit i always forget too. dash coming out and staying out or is it all part of a work in progress??? lol

Coming out and being replaced with a flocked 1 mate :y:

Also wanted to strip out the last of the sound deadening behind the dash etc. Just debating whether or not to remove the air bag ecu :panic: