Total Closure fitting

[Naked_Assassin]

Just curious how other people have fitted this?

Got a Toad Ai606 which pulls to ground, have used a relay to drive the windows but it seems a bit wrong to me. So was wondering if there was an approved way of doing this? Thanks.

[reevesy_vtr]

you need to get a window colsure module. you use the wire that changes state when armed to trigger the module.

[Naked_Assassin]

Wouldn't fitting a closure module to a closure module be a bit pointless? The Toad has a window closure feature which is all wired in, I just wanted to know which relay to use really. As the drivers side has stopped working and just checked and the relay has acutally melted. It is fused with a 25a fuse mind it.

[MR_TOAD]

AI606 has a total closure wire correct but only works on cars with total closure
the saxo does not have this feature
you will need to use a window closure module as Reevesy says and hard wire into car

Ian

[Naked_Assassin]

Cheers Toad, so you reckon something like this (http://cgi.ebay.co.uk/E2-UNIVERSAL-TOTAL-POWER-WINDOW-CLOSURE-CONTROL-MODULE_W0QQitemZ120347945540QQcmdZViewItemQQptZUK_ CarsParts_Vehicles_CarParts_SM?hash=item1c054bea44&_trksid=p3286.c0.m14&_trkparms=65%3A12|66%3A2|39%3A1|72%3A1683|293%3A1| 294%3A50) as apposed to using a relay?

[MR_TOAD]

Cheers Toad, so you reckon something like this (http://cgi.ebay.co.uk/E2-UNIVERSAL-TOTAL-POWER-WINDOW-CLOSURE-CONTROL-MODULE_W0QQitemZ120347945540QQcmdZViewItemQQptZUK_ CarsParts_Vehicles_CarParts_SM?hash=item1c054bea44&_trksid=p3286.c0.m14&_trkparms=65%3A12|66%3A2|39%3A1|72%3A1683|293%3A1| 294%3A50) as apposed to using a relay?

That is indeed the correct module for any car without total closure :y:

Regards Ian

[whitevanmen]

i've had the same problem with my alarm i bought off Ebay,it has the window closure feature on the alarm but when it was fitted it wouldn't work.Have you got the window closure module now and did it work for you?