map sensors vts

[clarkee_2001]

is a vts map sensor code 0261230057 can any1 please have a look at there. thanks

[clarkee_2001]

looked on ebay all the map sensors on there have a different code will i have 2 get 1 from citreon then

[BobC]

Hi, looks like a Bosch number to me. You'll need to ask a VTS owner with the same year as yours as there may be a few of these.

The ones I can find for a TU5J4 are:

BOSCH - 0 261 230 012 to RPO 08056
BOSCH - 0 261 230 034 from RPO 08057

For 2001 models onwards no Bosch number is given.

You'll find your RPO number on your paint label in the driver's door hinge pillar. See here for an example label: http://www.saxperience.com/forum/showthread.php?t=70007

The RPO number here is 09199.

[clarkee_2001]

will look on door now mate mines a 2000 x plate . but will look at number just thought it was odd y i couldn t find a map sensor with my code on hopefully i can find out if i have the right 1 on my car then get a new 1

[clarkee_2001]

mine says this on the inside of the door

08719ca
20426
kaub**
2266426

abit different to tht link u sent any help again please

[BobC]

Hi, then its this one I think: BOSCH - 0 261 230 034 from RPO 08057

[clarkee_2001]

so i have the wrong 1 on the car atm im guessin then

[BobC]

Is it causing you problems?

[BobC]

2nd hand one here: http://cgi.ebay.co.uk/206-C2-C3-ZX-Saxo-106-207-MAP-sensor-Bosch-0261230034_W0QQitemZ110415515290QQcmdZViewItemQQpt ZUK_CarsParts_Vehicles_CarParts_SM?hash=item19b547 0e9a&_trksid=p3286.c0.m14&_trkparms=65%3A12%7C66%3A2%7C39%3A1%7C72%3A1689%7C 293%3A1%7C294%3A50

£13

[clarkee_2001]

well tryed coil pack coolent sensor plugs and cleaned throttle body still judders at low revs bad in 5th gear be low 2 1/2 revs just thought about gettin a new map sensor

[ryanmt]

Theres 2 types.. well 3

but two types fitted to the vts.
The earlier one with the rectangular plug
the later one with the ovaled plug

then theres another with the same connector but different part number and blue sticker insead of black.. this fits and works fine, it superseded the old sensor thats why its got a different part number. calibration wise theyre all the same and as long as you swap the connector if its different you can swap to any of the 3.
http://img193.imageshack.us/img193/8984/83242723.jpg
http://i23.ebayimg.com/03/i/001/3b/51/5f70_12.JPG

That map sensor on ebays mine :)

[clarkee_2001]

thanks i no i have the 1 with a blue sticker on it and ends in 057 will look at plug 2morrow and will pop 2 scrappy will take wire cutters just in case thanks every 1