Nakared Dampers?

[Lloydie]

Got the rear of my car lowerd 40mm. Ever since then my car (from the rear) has been squeeking when i go over bumps. Could this be the dampers as they are still the originals? I wouldnt of thought they would get nakared so quick though. Or could it be he didnt tighten somthing up enough or just a simple spray of WD40?

Cheers, Lloyd.

[saxova]

Might be the arb needs tightening, saw a guide on it on here somewhere. Also u checked to see if anythings touching the torsion bar? I had a little bracket i had to bend a few mm to stop it rubbing/squeeking.

If its more a a tinnnNGGGG it'll be the arb :P.

[Lloydie]

Great mate, i'll go see if anything is rubbing. Thanks for the quick reply

[Lloydie]

Ok, so nothing looks to be touching. Can you tell me more about the arb?

[saxova]

gimme a sec.

[saxova]

http://www.saxperience.com/forum/showthread.php?t=75542&highlight=arb+tightening


:)

[E3D]

its probably the spring chatter as you dont have shorten dampers.

[saxova]

its probably the spring chatter as you dont have shorten dampers.

Thats funny, As there isn't any springs at the rear.

[Lloydie]

Just sprayed a shit load of WD40 on all the joints at the rear. I'll see if that helps

[farry1988]

Thats funny, As there isn't any springs at the rear.

lol at you, i dont think he ment that!

[E3D]

wait, so you only have the rear lowered? and the noise is from the rear. could be knackered bearing/rear beam. if it was lowered by splines it probably is. The loose arb is more of a clunking sound.

[saxova]

lol at you, i dont think he ment that!

lol at you for thinking that he wasn't thinking that.

[farry1988]

edit - its a misunderstanding, forgotten :)

[saxova]

i missed it before you edited, but i understand your misunderstandment lol :P.