50mm drop and 16inch wheels??

[squeeler]

Hi all, Im fitting 16inch oz wheels next week, and the car is lowered by 50mm already on coilovers, will i have any problems with the wheel trashing the arches??? if so what work will be needed...thanks smileys/afro.gif

[SNewham]

you will probably only have to do some arch work on the front which is that you will need to cut the plastic bit off the inside of the arch as it will catch on full lock.

There's not much rubbing thoug tbh mate.

Check the FAQ on the site for arch mods.

[dsh85]

wat tyres have you got mate? im down 60mm on 195/40/16 with no scrubbing!

[woodsy]

ill add on to this 195/45/16 wheels with i think lol 20mm spacers on

"how low can i go" "how low can i go"

and what to lower on

[Scott]

it will rub on the bumper bracket at the rear, heavily down 60mm. Even at standard height on 195/45 it will catch lightly there

[b0t13]

do some trial and error but id think itll need some modding to get it to work correctly, otherwise youll only be able to drive forwards and backwards lol

[s4xo]

take the boxs at the back by the wheel arch,cut the lip on the plastic arch,and bend the bumper bracket back.