Wiring Sub

[edwcorst]

Hi guys,

ive had a read through the guides etc.. just want to double check im right. Ive got two JBL 12" gt4 subs which are 4ohm. now this website says to wire them up like so.. the top picture? http://rockfordfosgate.com/scripts/rightnow.cfg/php.exe/enduser/std_adp.php?p_faqid=898

right so would this mean i take both positive wires from each sub and connect them to one terminal and the two negative connect them to one terminal also? rather than having all 4 wires seperate or what?

thanks..

[Tontsy]

what amp have you got ? . . . you could wire it up at 2 Ohm, if your amp can handle it.
if you have 2 + and 2 - on the amp... jsut do that.

dont bother getting muddled up with resistance for a small set up.

[edwcorst]

its a vibe a7 mono amp ... Im not sure if they have two of each i know where the cables were connected to the sub there are two connectors on the side of each which are being used? (where the +/- are there are two connectors on the side similiar which are not being used) looks similiar to this .. _|__|_ .....So what would you advise to wire it up mate? At the moment they just dont seem to be bassy enough

[edwcorst]

bump..

[edwcorst]

bumppp any help please?