View Full Version : Air bag light stage 2...
DannyB_VTR
20th January 2006, 19:20
Hi guys ive had the problem for ages.... it use to mend by turning the engine off and moving the passenger chair about abit. But not after everything it still flashes.. ive look at both connections and taken them off the clips (havent disconnected the wires coz it looks like ive had to cut them off and block connect them back on) so id like to no how the hell i can cut the dam light off the dashboard.. a few people have said disconnect the air bag light.. how would i go about this?
liquid8
20th January 2006, 21:06
mine is the same it used to do the same as urs but know it wont go off have u had a front end bump l8tly
wideboy
20th January 2006, 23:06
Hi guys ive had the problem for ages.... it use to mend by turning the engine off and moving the passenger chair about abit. But not after everything it still flashes.. ive look at both connections and taken them off the clips (havent disconnected the wires coz it looks like ive had to cut them off and block connect them back on) so id like to no how the hell i can cut the dam light off the dashboard.. a few people have said disconnect the air bag light.. how would i go about this?
The brown block under the seat just clips apart. No cutting involved.
Make sure ignition is off, unclip the brown block from the seat, pull block apart - secure any loose wires....reconnect brown block together, wrap in insulation tape, re-attach to underneathe of seat making sure neither of the orange wires are tightly-bent....
Turn ignition on, and bingo - light gone hopefully
vBulletin® v3.8.2, Copyright ©2000-2025, Jelsoft Enterprises Ltd.