locking wheel nut

[j_breezy]

i've lost my locking wheel nut. i've spent all day trying to get the bolt out. can anyone help me?

[slicksimon]

If ur handy at welding get a 19 mm bold weld it to the locker all the way round and let it cool down then turn the bolt and undo it. It needs to be strong weld. Put masking tape over the wheel to prevent damage

[DaN90]

I take its a standard locking nut??

If so you need the break off the anti tamper lug on the top with a lump hammer and chisel and the chisel the nut anticlockwise until it comes undone. Only way as they are a very good design.

[j_breezy]

Sorry. The anti tamper lug?

[j_breezy]

Help!!

[leefus-COV]

use a slightly smaller socket.. hammer it on and then it should undo, ive had to do that before