PDA

View Full Version : 40 / 50 - 50 / 60 Lowered pictures?

CraigLovelock
11th September 2009, 16:54
Ive looked at the height guide before you begin.

Cant decide weather to go 40 all around or 40 front 50 back etc.

Want to see what people think has the best sitting height. I want it to be heigher at back since it looks meaner :homme:

Im on vts alloys btw.

Pictures would be sexy.

Also, is it the right way doing the torsion bar in splines?

Couldnt remember lol.
iDaNz_VTR
11th September 2009, 16:54
50 front , 60 back
Ramsay
11th September 2009, 16:56
mines sits 40 at front and not got round to lowering the back yet just thought you might like to see a pic at this
http://i560.photobucket.com/albums/ss43/Ramsay2009/DSC00914.jpg
http://i560.photobucket.com/albums/ss43/Ramsay2009/DSC00919.jpg
VTR-GAZzA
11th September 2009, 16:57
40 all round or if u never have any 1 in the back 50 all round
CraigLovelock
11th September 2009, 16:57
50 front , 60 back

Not sure if thats too low at the back tho.

Since 60mm is quite low for my area like.
Junaid
11th September 2009, 17:33
mines 50mm drop all round
but the back looks 45mm

here some pics

http://i843.photobucket.com/albums/zz352/J15KHN/Photo-0765.jpg

http://i843.photobucket.com/albums/zz352/J15KHN/Photo-0762.jpg



coming out my drive :P

http://i843.photobucket.com/albums/zz352/J15KHN/Photo-0775.jpg
3cott
11th September 2009, 17:39
Im down 55mm front 70mm back

http://img3.imageshack.us/img3/2018/1000939u.jpg (http://img3.imageshack.us/i/1000939u.jpg/)http://img3.imageshack.us/img3/1000939u.jpg/1/w3264.png (http://g.imageshack.us/img3/1000939u.jpg/1/)
Junaid
11th September 2009, 17:54
that does not look 70mm
3cott
11th September 2009, 18:04
that does not look 70mmWell it is 70mm at the BACK...
Junaid
11th September 2009, 18:08
looks 50mm
i've seen 70mm in person when dropped 70mm it will cover the tyre
gaz4399
11th September 2009, 18:14
front 40 rear 45 ish on 15" wheels, poor quality pics but you get the idea

http://i530.photobucket.com/albums/dd350/gaz4399/vts/IMG_0136.jpg

http://i530.photobucket.com/albums/dd350/gaz4399/vts/IMG_0133.jpg

http://i530.photobucket.com/albums/dd350/gaz4399/vts/IMG_0135.jpg
CraigLovelock
11th September 2009, 18:19
Hmm. Whats the right way to lower the tosion bar?

Whats like the smallest increasements you can do?

Is 'splines' the right way?
moxy89
11th September 2009, 18:26
removing the bar is the correct way..... go 40mm front and 40 at the rear looks the best... and handlingis spot on.... are you going just springs or shocks and dampers aswell
CraigLovelock
11th September 2009, 18:28
Just springs in this case.

;) Cant be spending loads...
Mochachino
11th September 2009, 18:32
60mm Front
80mm Rear

http://i244.photobucket.com/albums/gg33/dan_sax/Projekts%20Black%20Edition%202009/23072009414-1.jpg
luke1988
11th September 2009, 19:11
not the best pic but 40mm all round

http://i692.photobucket.com/albums/vv285/luke1988/100_0316.jpg
gouldy87
11th September 2009, 19:22
as a general rule of thumb with the rear being alot higher than the front on saxos you should lower the rear (torsion bars which you can set to any height if done correctly) 20mm lower than you lower the front (springs obviously)

E.G=

front 35mm rear 55mm

front 40mm rear 60mm

front 50mm rear 70mm

front 60mm rear 80mm

this makes the car "look level" so to speak, hears mine 60mm front 80mm rear=

http://i371.photobucket.com/albums/oo156/gouldy87/253.jpg

http://i371.photobucket.com/albums/oo156/gouldy87/006.jpg

http://i371.photobucket.com/albums/oo156/gouldy87/19092008215.jpg

i hope this is of some use to you mate