help, my saxo is vibrating like when the engine mount snapped but all engines mounts are fine ??

[reecebashford]

my saxo is vibrating again!

its feels excatly the same as when a bolt on the drivers side engine mount snaped a while back( the one witch you cant see without taking the engine mount off)

however i have had this mount off an all of the bolts are fine i have also checked the gear box mount and all 3 bolts on that are tight ?

and the botom engine mount appears fine also

any ideas?


it feels to me like its gota b a engine mount again as the vibration goes away when u reved the engine and drive ?? but i just cant see anything wrong?

anyone had this problem ??


thanks

[paulio1000]

mine vibrates have you checked the rubbers? thats what has gone on mine if not bolts are too tight or rubbers are cracked perished or old and gone solid

[reecebashford]

yer the ribberson the gear box mount look and feel fine

ther is a worn rubber on the drivers side mount, its sort of wedged between sumthing? but that was worn the last time ??

do you reckon it could be that ?

[paulio1000]

yes, definatly specially that, that 1 on mine has gone just havnt got the time to replace it

[josfurio]

I had an Engine Mount bolt snap & had it replaced. Then I had problem again with the vibrating etc but the engine mount looked ok to look at but the bolt had actually unscrewed itself. Just check the bolt is done up tight.

[reecebashford]

was this the bolt on the drivers side enine mount ? the one that snaps ?

as i said i took it off and it appear to be fine and tight, allthough i never actulay checked it for tightness ??

i will check this and see what i find

thanks

[adam661]

could it not be the exhaust rattling on the dwn pipe on gearbox so wen u rev the pressure in the exhaust stops the rattle?

[josfurio]

Yes mine was the 1 on the drivers side. It's just a thought but thats whay mine was & it's ok now & vibration & noise went.

[paulio1000]

Yes mine was the 1 on the drivers side. It's just a thought but thats whay mine was & it's ok now & vibration & noise went.
did you get someone to do that or did you do it yourself? mine is snapped
i dont no whether to attempt it myself or take it to the garage?

[reecebashford]

its easy enough to do yourself, i just checked mine for tightness and it was fine,

so i then looked at the gear box mount again, and although it appears to look fine, once i took it off all the rubbers have corroded, i then put it back on and started the engine and it has now stoped the vibration,

so im guesing its in a different position and has temporaraly solved the problem

MY BAD FOR NOT TAKING THE MOUNT OFF :(
sorry

how much is a new gear box mount ?

thanks for the replys

[mossy-11]

could it not be the exhaust rattling on the dwn pipe on gearbox so wen u rev the pressure in the exhaust stops the rattle?

i think i have this problem with my saxo furio, how do i fix this? thanks